| ||Thread Tools||Search this Thread|
|09-22-2007, 06:50 AM||#1 (permalink)|
Join Date: Mar 2007
RT Pro Help
This is my RT Pro-
I am looking for some adivice. The feedneck is ungodly awful. Do I cut the feedneck and add a Warpfeed(which I already have) or do I do I just try to find a CF body? What would be the best route to go? If it is the new body, where is the best place to find one? Any ideas or help is greatly appreciated. Also, what would this marker be worth? I am rebuilding the RT valve(hence, no braided line or valve). Thanks for your time.
|09-22-2007, 04:37 PM||#4 (permalink)|
Lions, Tigers, and Bears...
Join Date: May 2007
I wouldnt cut the feedneck.
Those bodies are out of production now, and so are the centerfeed
barrels (a cf body is worthless without a cf barrel). You could get 85.00 on Ebay for the barrel and body.
Twist lock barrels are as low as 10.00 on AO and you should be able to get a powerfeed body for 25.00.
Figure out which you want right or left and go that route then.
You can feed from the bottom side of the powerfeed instead of the top for a warp setup or Qloader.
Powerfeed right mainbody on Ebay :
Automag Classic Mainbody left feed - (eBay item 230172222328 end time Sep-22-07 22:51:57 PDT)
Last edited by going_home; 09-22-2007 at 05:18 PM.
|Thread Tools||Search this Thread|