mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Air Gun Designs (http://www.mcarterbrown.com/forums/air-gun-designs/)
-   -   Sydarm Parts (http://www.mcarterbrown.com/forums/air-gun-designs/230338-sydarm-parts.html)

alkafluence 04-01-2013 10:22 PM

Sydarm Parts
 
Anyone definitively know what length on/off pin and which sear assembly are used in the Sydarm?

Are they the same on/off pin and sear assembly as the regular Automag or some other non-standard variant?

kevdupuis 04-06-2013 08:23 AM

A little late on a reply. But to answer, the sydarm uses the stock AM/MM sear and the on/off assy for the classic valve or you can throw a RT on/off in also which is what I use in mine.

alkafluence 04-06-2013 09:05 AM

To clarify - RT Pro / X Valve (not original RT) right?

kevdupuis 04-06-2013 11:55 AM

Actually the RTpro/RT/X valve on/off assy is the same, it's just the RTpro valve had a small recess milled to take just the single small on/off top o-ring and the rest had it milled larger to take the two 0-rings though I've never seen a classic RT valve to know if it had a small or large pocket to take either one or two o-rings.


All times are GMT -4. The time now is 06:54 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC