mag buildup - Page 2

stircrazzzy · 11-30-2007, 01:53 PM

Interesting, I've been reading that a lot of people are having issues with the Lv 10's. Thanks for the tip. And also, I'll be using HPA.

Clearush · 11-30-2007, 02:11 PM

installed and tuned three lvl 10 setups so far and I've never had an issue with mine at all. Never lost a fomie that I know of.

if the lvl 10 is not properly tuned (i.e. a twib know it all that doesn't know anything trys to install it) it will leak and/or give you all kind's of hell. But anyone that can tinker and trouble shoot and reads the instructions and looks at all the information on the lvl 10 before installing should not have an issue. I would suggest running at least 2 tanks of air through the marker during tuning and testing to make sure its right and wear in everything.

Automags Online - Resources: The Level 10

following these instructions exactly will almost always give success.

some movie links for lvl 10

YouTube - Level 10 quick installation guide AGD paintball

11-30-2007, 02:11 PM	#12 (permalink)
Clearush MCB Member Join Date: Mar 2006 Location: HTown, TX Posts: 1,503	installed and tuned three lvl 10 setups so far and I've never had an issue with mine at all. Never lost a fomie that I know of. if the lvl 10 is not properly tuned (i.e. a twib know it all that doesn't know anything trys to install it) it will leak and/or give you all kind's of hell. But anyone that can tinker and trouble shoot and reads the instructions and looks at all the information on the lvl 10 before installing should not have an issue. I would suggest running at least 2 tanks of air through the marker during tuning and testing to make sure its right and wear in everything. Automags Online - Resources: The Level 10 following these instructions exactly will almost always give success. some movie links for lvl 10 YouTube - Level 10 quick installation guide AGD paintball __________________ Carter's Commando Texas division The White Board Comic My SCP Feedback Ebay Feedback MCB Feedback Last edited by Clearush; 11-30-2007 at 02:20 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

11-30-2007, 01:53 PM	#11 (permalink)
stircrazzzy MCB Member Join Date: Nov 2007 Posts: 175	Interesting, I've been reading that a lot of people are having issues with the Lv 10's. Thanks for the tip. And also, I'll be using HPA.