|
             |
 |
|
 |
| | LinkBack | Thread Tools | Search this Thread |
01-11-2008, 10:50 AM
| #1 (permalink) |
| MCB Member  Join Date: May 2006 Location: Ambridge, PA  | Stock gripframe/shoulder stock question. Anyone know if the crossman 1399 composite air rifle stock will fit a CF mag frame? I think the angle is right, I am guessing I'll have to modify the stock as the grip holes wont line up but if that's the only issue I'll go ahead and buy one. Anybody know for sure? 
__________________ |
|  |
|
01-11-2008, 11:23 PM
| #2 (permalink) |
| Thrillin' Heroics  Join Date: Jan 2007 Location: Whitehorse, Yukon/Windsor, Ontario | Ayup, it'll fit. Crossman and the old AGD and Sheridan frames are all almost identical (The AGD ones are level on the bottom for a bottomline, but that's the only dif).
__________________ Luuubbbbbeeeee! Glory, glory, what a hell of a way to die, With a rifle in your hands and you're falling through the sky, Glory, glory, what a hell of a way to die, He ain't gonna jump no more! |
|
| |
|
01-11-2008, 11:35 PM
| #3 (permalink) | |
| Corn-on-the-cob champion!  Join Date: Aug 2007 Location: Summerfield, FL | I put one on my minimag back in '92. I had to carve out a small part of the inside of it on the bottom. I did this with a blowtorch and a screwdriver as I didn't have a dremel at the time. IIRC, the holes lined up. Good luck and post pics!
__________________ Quote:
| |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
