Paintball

[secretweaponevan]

Anyone know a source for power tube o-rings in quantities? I need about 500-600 and at a unit cost of $1.00 each from AGD + Shipping, I just can't do that.

I ordered the only white dash 010 o-rings from mcmaster, but they are PTFE and way too hard.

Thank you much.

[Fluff]

eBay Store - Paintball o-rings and other:
This ebay seller has been good so far. Maybe they can get them

[secretweaponevan]

Thanks for the quick reply Fluff.

Anyone know what material they are?
Silicone?
Urethane?

[C5TEK]

If you don't find what you need there let me know what size,material,and durometer rating you need and I should be able to get some.

[CCmachinist]

O-rings West Inc is where we get some of our special ones.

[SHAG]

hi,

Originally Posted by secretweaponevan

Anyone know a source for power tube o-rings in quantities? I need about 500-600 and at a unit cost of $1.00 each from AGD + Shipping, I just can't do that.

I ordered the only white dash 010 o-rings from mcmaster, but they are PTFE and way too hard.

Thank you much.

Mag O Rings are 90 Durometer urethane O rings in the power tube. The only place where they use telfon is in the On/Off Pin area. You should be able to contact an O ring / seal supplier with the specs and see what they can do for you.

Why do you need 600 O rings though? Bought 600 rental mags from Skirmish? Also did you call AGD and see if they would cut you a break on 600.

Later,
shaggy

[amcfall]

Mcmaster has -010 in 90 duro poly, but at $15 for 25 you can find a better deal if you buy quantity.

Avery

[secretweaponevan]

Originally Posted by amcfall

Mcmaster has -010 in 90 duro poly, but at $15 for 25 you can find a better deal if you buy quantity.

Avery

Aye, thanks for checking. Saw those, but I need them in white/clear as a direct replacement for power tube o-rings.

[secretweaponevan]

Originally Posted by SHAG

Why do you need 600 O rings though? Bought 600 rental mags from Skirmish? Also did you call AGD and see if they would cut you a break on 600.

Later,
shaggy

200 rental mags. 1 in the power tube and 2 in the on/off.

Nah, just have a "project" in mind.

[AGDRetro]

I've spent some of spare time at work (Fastenal) trying to find vendors that have some of the more difficult to replace (short of going straight to AGD) seals. I'm on a quest for the RT bumpers right now, wish these suckers were easier to find...