Paintball

[MeÐiC]

I use a 2.5" 10/32 screw in place of the battery thumb screw. I also use a filler in the Q socket neck to fill the void. Piece of wood molded to fit in there would work. On mine, I cut down the SpecOps Tac One "Q-Bow" mounting adaptor so it sticks out about an 1/8" in the center of the cresent shape of the Q socket. Between that and the emag battery I have a thin neoprene washer to prevent any scratching and keeps things snug.

[VVulfe]

Wow...does it turn out handgrip-sturdy?

[MeÐiC]

It's very sturdy. My non-trigger hand goes on the underside of the qloader socket, kinda like the way you'd hold a rifle.

[VVulfe]

So, the Q-Loader attaches to the SpecOps mounting kit, which you've bolted to the battery pack?

(Just double checking )

[Marauder_Pilot]

Where's Tuna getting his E-Mags from? Does he just recycle used ones, or does he have a magic stash that he's pulling out of his butt, and by butt I mean AGD?

[Brewtt]

Originally Posted by VVulfe

So, what makes the Intelliframe "Intelli-"?

I only skimmed the thread but I didn't see this answered fully.

The "Intelliframe" is "Intelli-" because of the mounting brackets for the "Intelli-feed" circuitry(extra stuff) to run your Intelli-feed Revy hopper. This hopper has a direct link to the stuff you mount inside the Intelliframe to make the hopper feed ELECTRONICALLY with EVERY trigger pull.

This is how I understand it anyway.

[MeÐiC]

Originally Posted by VVulfe

So, the Q-Loader attaches to the SpecOps mounting kit, which you've bolted to the battery pack?

(Just double checking )

No the qloader is attached to the emag through a long bolt in place of the battery pack thumb screw. I used a modified specops q mount to fill the void of the neck of the q socket.

[MeÐiC]

Originally Posted by Marauder_Pilot

Where's Tuna getting his E-Mags from? Does he just recycle used ones, or does he have a magic stash that he's pulling out of his butt, and by butt I mean AGD?

He only has a few new ones left. I believe he bought up the last of the emags from AGD awhile back.

[VVulfe]

Originally Posted by MeÐiC

He only has a few new ones left. I believe he bought up the last of the emags from AGD awhile back.

Don't say things like that! I don't have enough cash to jump on one just yet!

[Z3R0]

Originally Posted by Brewtt

I only skimmed the thread but I didn't see this answered fully.

The "Intelliframe" is "Intelli-" because of the mounting brackets for the "Intelli-feed" circuitry(extra stuff) to run your Intelli-feed Revy hopper. This hopper has a direct link to the stuff you mount inside the Intelliframe to make the hopper feed ELECTRONICALLY with EVERY trigger pull.

This is how I understand it anyway.

Pretty much. Think of how an RF loader works. Now remove the circuit board controlling the firing and add a wire connecting the frame to the loader . Same function, different methods.

-Z3R0