twist lock supplies?

cockerpunk · 04-29-2008, 08:12 PM

where can get twistlock barrel orings and nubbins? i just decided to pick up another mag, and i want to use the twist lock setup instead of a cocker threaded.

Robertsr · 04-29-2008, 08:27 PM

Welcome to Airgun Designs

cockerpunk · 04-29-2008, 10:18 PM

i didn't find them there or at tunamart

nm, found them on there. dumb ...

Robertsr · 04-30-2008, 08:23 AM

Yeah, the parts aren't always organized the way I would do it on AGD's site, but they are there.

chairman_mao · 04-30-2008, 09:17 AM

Tank O-rings also work on twist lock barrels.

Cunha · 04-30-2008, 01:22 PM

But not as well. Twist lock barrels are pretty perfect when used with the right O rings.

Nobody · 05-01-2008, 08:53 AM

if you need barrel nubbins, send me a PM. don't have any more twist lock barrels, but plenty of detents.

mtaylor · 05-08-2008, 07:00 PM

Phantom o-rings work well on twistlocks. Also, it's pretty easy to make some nubbins out of paperclips.

splattttttt · 05-17-2008, 11:13 PM

Any advice you might be able to offer on getting my new Palmer made twist lock berrel to mate properly on the twist lock pin. \
I can see it's not snapping in all the way by looking down the breech.
Thanks.

Robertsr · 05-18-2008, 09:51 AM

What seems to be the problem?

Pin not lining up? Pin not going all the way to the end of the slot when you turn it?

Most of the problems that you run into with the retaining pin can be adjusted by changing the tension of the pin itself. I've had barrels that I had to lessen the tension to get on, and those that I've had to increase the tension to get to keep from wobbling...

04-29-2008, 08:12 PM	#1 (permalink)
cockerpunk MCB Member Join Date: Jul 2006 Posts: 1,019	twist lock supplies? where can get twistlock barrel orings and nubbins? i just decided to pick up another mag, and i want to use the twist lock setup instead of a cocker threaded. __________________ COCKERPUNK CUSTOMS NOW OPEN!! SC feed, mini, and halfblocking for cockers, phuzzarding for phantoms! MY WTB LIST phuzzarding now only 100 bucks!

04-29-2008, 08:27 PM	#2 (permalink)
Robertsr Ultimate Battle Monkey Z Join Date: Apr 2006 Location: Waynesboro, VA Posts: 2,913	Welcome to Airgun Designs __________________ Geriatrically Assured Destruction

04-29-2008, 10:18 PM	#3 (permalink)
cockerpunk MCB Member Join Date: Jul 2006 Posts: 1,019	i didn't find them there or at tunamart nm, found them on there. dumb ... __________________ COCKERPUNK CUSTOMS NOW OPEN!! SC feed, mini, and halfblocking for cockers, phuzzarding for phantoms! MY WTB LIST phuzzarding now only 100 bucks!

04-30-2008, 08:23 AM	#4 (permalink)
Robertsr Ultimate Battle Monkey Z Join Date: Apr 2006 Location: Waynesboro, VA Posts: 2,913	Yeah, the parts aren't always organized the way I would do it on AGD's site, but they are there. __________________ Geriatrically Assured Destruction

04-30-2008, 01:22 PM	#6 (permalink)
Cunha MCB Member Join Date: Apr 2006 Location: Monterey, CA Posts: 3,962	But not as well. Twist lock barrels are pretty perfect when used with the right O rings. __________________ If you're not moving, there is no movement. New style Sterling STP for sale

04-30-2008, 09:17 AM	#5 (permalink)
chairman_mao Rec Poster Join Date: Jun 2007 Posts: 33	Tank O-rings also work on twist lock barrels.

05-01-2008, 08:53 AM	#7 (permalink)
Nobody Active Member Join Date: May 2007 Posts: 203	if you need barrel nubbins, send me a PM. don't have any more twist lock barrels, but plenty of detents.

05-08-2008, 07:00 PM	#8 (permalink)
mtaylor Rec Poster Join Date: Feb 2008 Posts: 54	Phantom o-rings work well on twistlocks. Also, it's pretty easy to make some nubbins out of paperclips.

05-17-2008, 11:13 PM	#9 (permalink)
splattttttt MCB Member Join Date: Apr 2006 Location: Bean Town, U.S.A. Posts: 2,719	Any advice you might be able to offer on getting my new Palmer made twist lock berrel to mate properly on the twist lock pin. \ I can see it's not snapping in all the way by looking down the breech. Thanks. __________________ My Feed Back and album Norman Vincent Peale: "Believe that you are defeated, believe it long enough, and it is likely to become a fact. We tend to get what we expect." Carpe Diem Whish your Dog was smarter???

05-18-2008, 09:51 AM	#10 (permalink)
Robertsr Ultimate Battle Monkey Z Join Date: Apr 2006 Location: Waynesboro, VA Posts: 2,913	What seems to be the problem? Pin not lining up? Pin not going all the way to the end of the slot when you turn it? Most of the problems that you run into with the retaining pin can be adjusted by changing the tension of the pin itself. I've had barrels that I had to lessen the tension to get on, and those that I've had to increase the tension to get to keep from wobbling... __________________ Geriatrically Assured Destruction

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search