Paintball

[ajnin]

I have noticed that body to body is different as well. i have a ule body that no matter what i do aside from putting a clipped spring in it fires semi. so take out alll your bits and pieces and experiment.

[hockeytown]

Thanks for all the help guys.

The o-ring before the spacer in the power tube seemed to do the trick. Too bad I ran out of air so I don't know for sure. I will let you all know after saturday. Besides, if it still leaks, I can just use it in semi.

[splattttttt]

Originally Posted by hockeytown

Thanks for all the help guys.

The o-ring before the spacer in the power tube seemed to do the trick. Too bad I ran out of air so I don't know for sure. I will let you all know after saturday. Besides, if it still leaks, I can just use it in semi.

I was wondering if everything's going well with your pump Mag?
The same problem as yours that I had with one of mine was was traced to the tiniest of the two orings found at the bottom of the on/off.

[dead possum]

was it hissing air constant till cocked? mine seams to only make a his sound when the pump/cocking motion is in effect, so i cant tell if it is an air leak or just chambers pressurizing, any thoughts? up next is a rebuild kit ...have not done that, or checked any of the o-rings and it seemed to do better when the velocity was turned up and after a few shots. the valve has sat unused for about a year since i bought it, and i dont know how long it sat prior to that. any thoughts or is this 'momentary hiss' a chamber charging?