|
             |
 |
|
 |
| | LinkBack | Thread Tools | Search this Thread |
06-12-2008, 03:19 PM
| #1 (permalink) | |
| Active Member  Join Date: Oct 2006 Location: Southgate, MI
Posts: 314
| My first Mag Now that i got it i was wondering what kind of maintenence is required. 68 Classic Valve and is the velocity in=highrt and out=lower fps? Thanks
__________________ Quote:
| |
|  |
|
06-12-2008, 03:23 PM
| #2 (permalink) |
| Post Whore  Join Date: Feb 2007 Location: San Francisco, CA
Posts: 1,066
| Slide the valve out, drop or two of oil in the hole marked "oil" Get all the paint off of the marker. Go play Repeat.
__________________ Boomerangs are pretty much Frisbees for antisocial kids I don't understand how hitting someone with one of 300 balls, fired at 30BPS is skill.... yet a single ball to the face from a PGP is a "lucky" shot....  My gallery Classic Nickel 15rd PMI-1 for trade... HERE If we've dealt in the past, please leave feedback in my Feedback thread |
|
| |
|
06-12-2008, 03:24 PM
| #3 (permalink) |
| Ultimate Battle Monkey Z  Join Date: Apr 2006 Location: Waynesboro, VA
Posts: 3,080
 | Righty tighty and lefty loosey.  You're right on with the velocity.As far as maintenance is concerned, just run a little oil through the system after each game and wipe up the paint from the outside. I've had classic valves run on the same seals for over 5 years with no internal maintenance other than a quick oil in the ASA.
__________________ Geriatrically Assured Destruction    |
| |
|
06-12-2008, 10:16 PM
| #4 (permalink) |
| Never Forget  Join Date: Jul 2007 Location: Michigan
Posts: 848
| These videos are from the man himself, and they helped me a great deal. YouTube - Broadcast Yourself. Are you from Michigan?
__________________ http://www.mcarterbrown.com/forums/f...-feedback.html |
|
| |
|
06-13-2008, 03:27 PM
| #6 (permalink) | |
| Active Member Join Date: Oct 2006 Location: Southgate, MI
Posts: 314
| Just like air tool oil? and oil the bolt or put some lube on it? And yes I am from Michigan-Southgate to be specific You going to monster
__________________ Quote:
| |
|
| |
|
06-13-2008, 03:34 PM
| #7 (permalink) |
| Never Forget Join Date: Jul 2007 Location: Michigan
Posts: 848
| I can't go to MMG this year. There is a big game tomorrow at future ball in whitmore lake.
__________________ http://www.mcarterbrown.com/forums/f...-feedback.html |
|
| |
|
06-13-2008, 03:36 PM
| #8 (permalink) |
| MCB Member  Join Date: Mar 2006 Location: HTown, TX
Posts: 1,405
| air tool oil would be fine, a little oil down the power tube helps also to lubricate the orings in there. 1. don't over tighten the valve bolt,finger tight is usualy good enough. 2. when adjusting velocity small increments make major changes a quater turn can change your velocity by 50fps 3. input pressure needs to be above 500psi for proper operation. 4. get an oring kit, orings will fix 95% of any problems you have with a mag 5. enjoy shooting mag
__________________ Carter's Commando Texas division  The White Board Comic My SCP Feedback Ebay Feedback MCB Feedback |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
