Whats going on?

Kris · 06-24-2008, 10:11 AM

RT ULE Customs out of stock? (Are they coming back?)

I was toying with the idea of getting a new marker as I am spending time at the field again after a 5 year break. To that end I was wanting to get another mag similar to my own. So I wanted another RT ULE Custom. They were available a week ago...

Zoo · 06-24-2008, 11:54 AM

Does it have to be new? You can easily piece together an RT ULE from the BST section here or on AO.

Give AGD a call and see what's up.

Kris · 06-24-2008, 04:36 PM

I don't suppose it has to be new... But I have found that Mags tend to be finiky after folks mess with them. I litterally just put a few drops of air into the bottle before I filled up my maxflo (There is a month left on the hydro!) and our mag (And the maxflo) aired up and performed flawlesly after sitting in a non-climate controlled storage unit (South Florida) for 4 1/2 years!!! The 99 Mini-STO leaked from every oriface. So I would prefer straight from AGD. They do still test / tune each marker before they go out the door, correct?

I have already given up on finding some benchmark parts to match. An all stock RT ULE from AGD with a red body and flat black parts otherwise is what I have my heart set on.

So there is no news? I looked around casually, but I didn't search everywhere. (I did look at AO, but I couldn't remeber what my username/password there. and I was on here looking at a marker so I posted up.)

Frink · 06-24-2008, 04:45 PM

Am I reading that you put oil directly into the HPA bottle before you filled it? If so, wouldn't that be a safety concern?

himurax13 · 06-24-2008, 04:54 PM

Quote:

Originally Posted by Frink

Am I reading that you put oil directly into the HPA bottle before you filled it? If so, wouldn't that be a safety concern?

Not unless you believe that atomizing oil in a high pressure tank turns it into a bomb waiting to explode.

Zoo · 06-24-2008, 05:48 PM

Quote:

Originally Posted by Kris

I don't suppose it has to be new... But I have found that Mags tend to be finiky after folks mess with them.

As long as it hasn't been severely abused, an AGD valve can be pulled out of a closet after years of neglect and fire just fine after generously oiling the orings. Sure, you may have to tune the level-10 bolt, but it doesn't take much effort.

I really think you'll save some cash by finding the few parts you need to assemble it.

BenoitOWN · 06-24-2008, 06:36 PM

From AO:
"We had a problem with a batch of one part from a machine shop that caused us to postpone assembly of Tac's and ULE's.
The batch is now at the anodizer and should be here by this weekend. We plan to be in full production next week barring any
unlikely but possible problems that can occur. That is why it says allow 2-3 weeks for delivery on our site. Also we had very
high demand.

Thank You,

Dave"

VVulfe · 06-24-2008, 06:36 PM

Quote:

Originally Posted by BenoitOWN

From AO:
"We had a problem with a batch of one part from a machine shop that caused us to postpone assembly of Tac's and ULE's.
The batch is now at the anodizer and should be here by this weekend. We plan to be in full production next week barring any
unlikely but possible problems that can occur. That is why it says allow 2-3 weeks for delivery on our site. Also we had very
high demand.

Thank You,

Dave"

Aha! Phew

Kris · 06-24-2008, 11:43 PM

See I knew there had to be an anouncement somewhere! Woohoo! New mag here I come!

Robertsr · 06-25-2008, 02:52 AM

Quote:

Also we had very
high demand.

That gave me a warm fuzzy feeling.

06-24-2008, 10:11 AM	#1 (permalink)
Kris Active Member Join Date: Jun 2008	Whats going on? RT ULE Customs out of stock? (Are they coming back?) I was toying with the idea of getting a new marker as I am spending time at the field again after a 5 year break. To that end I was wanting to get another mag similar to my own. So I wanted another RT ULE Custom. They were available a week ago...

06-24-2008, 11:54 AM	#2 (permalink)
Zoo formerly guseppe16 Join Date: Aug 2007 Location: Buckeyes' HQ	Does it have to be new? You can easily piece together an RT ULE from the BST section here or on AO. Give AGD a call and see what's up. __________________ www.DeltaSquad.info Grips, tanks, etc for sale Either an inflatable bunker or a tree, both work for me.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

06-24-2008, 04:36 PM	#3 (permalink)
Kris Active Member Join Date: Jun 2008	I don't suppose it has to be new... But I have found that Mags tend to be finiky after folks mess with them. I litterally just put a few drops of air into the bottle before I filled up my maxflo (There is a month left on the hydro!) and our mag (And the maxflo) aired up and performed flawlesly after sitting in a non-climate controlled storage unit (South Florida) for 4 1/2 years!!! The 99 Mini-STO leaked from every oriface. So I would prefer straight from AGD. They do still test / tune each marker before they go out the door, correct? I have already given up on finding some benchmark parts to match. An all stock RT ULE from AGD with a red body and flat black parts otherwise is what I have my heart set on. So there is no news? I looked around casually, but I didn't search everywhere. (I did look at AO, but I couldn't remeber what my username/password there. and I was on here looking at a marker so I posted up.)

06-24-2008, 06:36 PM	#7 (permalink)
BenoitOWN Paintball Fox Join Date: Oct 2006 Location: Canada, QC	From AO: "We had a problem with a batch of one part from a machine shop that caused us to postpone assembly of Tac's and ULE's. The batch is now at the anodizer and should be here by this weekend. We plan to be in full production next week barring any unlikely but possible problems that can occur. That is why it says allow 2-3 weeks for delivery on our site. Also we had very high demand. Thank You, Dave"

06-24-2008, 11:43 PM	#9 (permalink)
Kris Active Member Join Date: Jun 2008	See I knew there had to be an anouncement somewhere! Woohoo! New mag here I come!