mag pump kit

maniacmechanic · 10-24-2006, 09:13 PM

i'm new to pumps , i've seen a couple of mag pumps ; does anyone sell pump kits or are these total custom ??? i've got a 68 classic i'd like to convert

Z50 · 10-24-2006, 11:13 PM

AGD made pump kits a while back, they are out of production. You can pick them up second hand in the online market places but be aware that they are quite expensive.

Walrus · 10-24-2006, 11:15 PM

The pump kits are out of production and have been for some time. The only way to get one now is to purchase a complete pump mag or to buy the parts from someone parting their pump mag. Brad Nestle at PBMaxx was making some kits a few months back, but they are not out of business and he isn't making any kits. You can always get someone to custom make one for you, but they will usually need a kit to look off of to get the measurements.

Also, you will need to make sure your body and rail are milled with a pump slot so you can put a pump kit on there. Honestly, the pump kit will cost about the same or more than your 68 Classic. Your best bet is to purchase a complete pump mag.

Shiba-Kun · 10-26-2006, 07:40 PM

Out of full disclosure, I'm leaning towards bidding on this auction as I know I can source the additional parts.

But if you win the auction, then I'd be happy knowing it went to a MCB member.

http://cgi.ebay.com/ws/eBayISAPI.dll...MakeTrack=true

AGDRetro · 10-27-2006, 10:53 AM

I assure you he is not gonna be the only guy bidding on that one...

I wish somebody would just get a good set of kalipers and just put the dimenions up either here or on AO so those with the resources could make a custom kit...

Ratzo · 10-27-2006, 01:59 PM

All I need is the wave spring as I plan on modding my MicroMag.

JaKaL · 10-28-2006, 02:21 AM

good luck with that. Micromags are so different it's going to take a LOT of tough work to just get the kit to bolt on, let alone dealing with the pump rod slot...

Ratzo · 10-31-2006, 02:08 AM

^^^^^^^ That's why all I need is the wave spring every thing else will have to be fabricated.

10-24-2006, 09:13 PM	#1 (permalink)
maniacmechanic Newbie Join Date: Sep 2006 Location: port st lousy fla orig from WVA	mag pump kit i'm new to pumps , i've seen a couple of mag pumps ; does anyone sell pump kits or are these total custom ??? i've got a 68 classic i'd like to convert __________________ Hank aka maniacmechanic founding member MIXXED BREED scenario team

10-24-2006, 11:15 PM	#3 (permalink)
Walrus Active Member Join Date: Apr 2006 Location: Near Nashville, TN	The pump kits are out of production and have been for some time. The only way to get one now is to purchase a complete pump mag or to buy the parts from someone parting their pump mag. Brad Nestle at PBMaxx was making some kits a few months back, but they are not out of business and he isn't making any kits. You can always get someone to custom make one for you, but they will usually need a kit to look off of to get the measurements. Also, you will need to make sure your body and rail are milled with a pump slot so you can put a pump kit on there. Honestly, the pump kit will cost about the same or more than your 68 Classic. Your best bet is to purchase a complete pump mag. __________________ "How would you like one across your lip?" - Fred G. Sanford My Gallery History: Line SI Bushmaster; PMI-3; VMX; '97 Autococker; KP-3; Enforcer 2(possible SWARM); Spyder Sonix; Monteneel Z-1; PGP 2K; BBT Typhoon; 2k1 SP Impulse; SP MiniMag; another PMI-3; VM-Magnum; Blazer #153; Pump MiniMag; Thrasher ULE Emag; Cool Camo Micromag; '94-'95(?) Evolution Minicocker; '95 Evolution Autococker; Blazer #710; CNC X-Mag; Gold Rush Micromag; Jungle Sunset Micromag; Wild Tiger Micromag

10-27-2006, 10:53 AM	#5 (permalink)
AGDRetro MCB Supporting Member Join Date: May 2006 Location: Ephrata, PA	I assure you he is not gonna be the only guy bidding on that one... I wish somebody would just get a good set of kalipers and just put the dimenions up either here or on AO so those with the resources could make a custom kit... __________________ Steve Shuey \| Teams Crimson Reign & Amish Mafia\| AGD Enthusiast MCB Feedback \| AO Feedback

10-28-2006, 02:21 AM	#7 (permalink)
JaKaL I am stuck on bandaid... Join Date: Apr 2006 Location: Orlando, FL	good luck with that. Micromags are so different it's going to take a LOT of tough work to just get the kit to bolt on, let alone dealing with the pump rod slot... __________________ ...'cause bandaid's stuck on me!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

10-26-2006, 07:40 PM	#4 (permalink)
Shiba-Kun MCB Member Join Date: Sep 2006	Out of full disclosure, I'm leaning towards bidding on this auction as I know I can source the additional parts. But if you win the auction, then I'd be happy knowing it went to a MCB member. http://cgi.ebay.com/ws/eBayISAPI.dll...MakeTrack=true

10-27-2006, 01:59 PM	#6 (permalink)
Ratzo Active Member Join Date: Apr 2006	All I need is the wave spring as I plan on modding my MicroMag.

10-31-2006, 02:08 AM	#8 (permalink)
Ratzo Active Member Join Date: Apr 2006	^^^^^^^ That's why all I need is the wave spring every thing else will have to be fabricated.