Mag with 45/4500? - Page 3

SHOOT3R USA · 01-26-2009, 07:14 PM

Crossfire or Ninja.

pk5 · 01-26-2009, 07:17 PM

Crossfire output is at 850 psi which is good enough for a mag

Ninja output can be set up to a max of 950 psi, if you order it from their site you can specified what psi output you want it at.

AGD former master tech is also working at ninja, and they should be able to help you out if you want to go that route

idkfa · 01-26-2009, 08:13 PM

Thanks guys! I think I am going to look at a 50/4500 Ninja tank. I may need to look around for a size comparison picture, but it might be harder given they are newer tanks.

ironchef97 · 02-05-2009, 08:34 PM

I have a 50/4500 Ninja stubby, and it is awesome. It's 8 3/4" from where the tank threads end to the back of the tank, and it's the perfect size if you're using a Chimera frame or a Y-grip. If you're looking to save as much weight as possible, I'd get it with the aluminum bonnet option, as the brass one weighs ALOT relative to the aluminum one. There's a noticeable difference in tank weight with either one installed. Also, a small thing with the GA myth regs is if you're running with an ASA that's flush with the bottom of the grip (i.e. not sticking out), you MAY have problems screwing the tank in, because the Gauge extends past the beginning point of the bonnet threads, and gets in the way of screwing it in.

Anyways, I get about 700 shots off my Ninja (a rotor sized hopper 170 balls, and 4 pods 130 balls each) overboring, i would expect that number to hit 800 at least if I were to underbore.

01-26-2009, 07:14 PM	#21 (permalink)
SHOOT3R USA Let's Go Mountaineers! Join Date: Jun 2008 Location: West Virginia	Crossfire or Ninja. __________________ MCB Feedback Harb: SHOOT3R is genetically predisposed to be an idiot Harb: he saves most of the idiocy for in here SHOOT3R: so i was butt naked in this corn field right?

01-26-2009, 07:17 PM	#22 (permalink)
pk5 Stardust Memory Join Date: Sep 2006 Location: San Diego	Crossfire output is at 850 psi which is good enough for a mag Ninja output can be set up to a max of 950 psi, if you order it from their site you can specified what psi output you want it at. AGD former master tech is also working at ninja, and they should be able to help you out if you want to go that route __________________ Feedback http://www.mcarterbrown.com/forums/f...-feedback.html

01-26-2009, 08:13 PM	#23 (permalink)
idkfa Stock Class Aficionado Join Date: Mar 2007 Location: Vancouver, BC, Canada	Thanks guys! I think I am going to look at a 50/4500 Ninja tank. I may need to look around for a size comparison picture, but it might be harder given they are newer tanks. __________________ MCB Feedback The PhOG Feedback eBay Feedback Newfoundland Paintball Supply

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

02-05-2009, 08:34 PM	#24 (permalink)
ironchef97 . Join Date: Sep 2008 Location: SD	I have a 50/4500 Ninja stubby, and it is awesome. It's 8 3/4" from where the tank threads end to the back of the tank, and it's the perfect size if you're using a Chimera frame or a Y-grip. If you're looking to save as much weight as possible, I'd get it with the aluminum bonnet option, as the brass one weighs ALOT relative to the aluminum one. There's a noticeable difference in tank weight with either one installed. Also, a small thing with the GA myth regs is if you're running with an ASA that's flush with the bottom of the grip (i.e. not sticking out), you MAY have problems screwing the tank in, because the Gauge extends past the beginning point of the bonnet threads, and gets in the way of screwing it in. Anyways, I get about 700 shots off my Ninja (a rotor sized hopper 170 balls, and 4 pods 130 balls each) overboring, i would expect that number to hit 800 at least if I were to underbore.