mag

cheezstake · 03-12-2009, 06:57 PM

well iv noticed that agd.com has an ule custom that you can buy from them new, and it seems like its fully loaded, my question is, if i buy it how many shots am i guna get out of my small 45/45 tank? and would it be recomended to get a bigger adjustable tank, like a maxflow. i know mags dont like to run low on air, so am i guna run into problems with a 45/45

also has anyone purchased one of these off their site recently, because i tried to yesterday and it keept saying error.

iv never shot a mag with level 10, will it totally eliminate chops?

iv been a cocker guy but iv had this nitch for a mag and its not going away, so i feel like i should just buy it.

pk5 · 03-12-2009, 07:05 PM

1st. Don't buy new and really look around first, mag come in so many flavors now that if you buy one without looking at all the different bodies and frames you may regret it later.
2nd. Yes you wouldn't get that many shot with a 45/45, it also depend on what kind of reg is on it. Mag like to run on higher pressure, anything above 850 psi output is nice, like the crossfire or ninja reg.
3rd. You don't need a maxflow, just probably a 68/45 with one of the cross fire or ninja reg will do. Ninja reg can be adjust up to 950 psi, so that should work out nicely for you.
4th. Yes the level 10 does eliminate chop, just post here if you need to know how to tune it, or watch the video on youtube.
5th. I haven't purchase anything from them, the last time i got a new mag i got it from tunaman (tunamart.com).

You can also find a lot of different bodies on automags.org and especially if you just want a compact ule type, then rogue carry a few type of body on pblegion.com

If you want a brand new mag custom build, then just send an emag to tunaman (tunamart.com).

going_home · 03-12-2009, 09:48 PM

Used will definitely be cheaper but I wouldnt be afraid to buy a new one direct from AGD. Tunaman is awesome but he's very slow in returning emails sometimes due to his backlog of markers to tech.

You can call or email AGD, they will also send you a Paypal payment request if you want to pay that way but you will pay the extra fees.

Airgun Designs USA
401 Florine Court, Cary, IL 60013
Hours: Monday to Thursday 9:00 a.m. - 5:00 p.m. (Central Time)
Office Tel: 847-520-7507 • Fax: 847-548-2149
Tech Support Hours: Monday to Thursday 9:00 am to 5:00 pm (Central Time)
Tech Support Tel: 847-520-7225 • Tech Support Email: romanr@airgun.com

RT Pro ULE with Intelliframe or a Tach One, both have Xvalves with level 10 bolt. Get a ULT trigger kit too.

gunman_2000 · 03-13-2009, 01:06 AM

the ULE mag I have, we just ran paint through it last week and I got a hopper and 3 pods off it. She might hav ebeen shooting a little slow, but it'll certainly be enough paint for me.

I was going to buy new at some point, but I lucked out and found what I was looking for in the BST's. Check here and AO like the others said, you'll find something.

cheezstake · 03-13-2009, 06:45 AM

i think mabe im just going to get a 68 classic then upgrade to my liking.

im new to mags but classic mags and rt pros have different rails correct. why is this, are rt pros longer? also will a classic accept an xvalve?

idkfa · 03-13-2009, 06:53 AM

All Mag components are compatible with the following exceptions:

- RT Classic parts won't fit any other Mag, and vice versa
- some rails/bodies have different indents for the screw mount thing (Classic bodies/rails are square, ULE bodies and RT rails are round), but I believe you can mill them to fit if you really wanted.

If I left anything out, I am sure someone else will add.

going_home · 03-13-2009, 07:29 AM

Rt Classics really dont have anything you can upgrade but the trigger frame and barrel. You will spend more money upgrading then if you just went ahead and bought an RT Pro ULE from the beginning. Parts are more expensive then whole markers.

idkfa · 03-13-2009, 07:35 AM

I cannot go to the AGD store anymore because the ULE Mag keeps whispering my name and telling me to buy it.

That is not a bad price either for what is likely the best of mechanical paintball guns.

cheezstake · 03-13-2009, 12:24 PM

well i really like the dw dallara rail and the rpg pariah body. so i figure if i start out with a classic then search for the rail and body i will eventrually get both, then all i need to do is get an xvalve, and im done, and thats my perfect mag.

Greenmtnphantom · 03-13-2009, 12:31 PM

It's funny, I have yet to see a mag body that I like more than the old minimag bodies

03-12-2009, 06:57 PM	#1 (permalink)
cheezstake Active Member Join Date: Feb 2009	mag well iv noticed that agd.com has an ule custom that you can buy from them new, and it seems like its fully loaded, my question is, if i buy it how many shots am i guna get out of my small 45/45 tank? and would it be recomended to get a bigger adjustable tank, like a maxflow. i know mags dont like to run low on air, so am i guna run into problems with a 45/45 also has anyone purchased one of these off their site recently, because i tried to yesterday and it keept saying error. iv never shot a mag with level 10, will it totally eliminate chops? iv been a cocker guy but iv had this nitch for a mag and its not going away, so i feel like i should just buy it. __________________ mcb customcockers pbnation AO

03-12-2009, 07:05 PM	#2 (permalink)
pk5 Stardust Memory Join Date: Sep 2006 Location: San Diego	1st. Don't buy new and really look around first, mag come in so many flavors now that if you buy one without looking at all the different bodies and frames you may regret it later. 2nd. Yes you wouldn't get that many shot with a 45/45, it also depend on what kind of reg is on it. Mag like to run on higher pressure, anything above 850 psi output is nice, like the crossfire or ninja reg. 3rd. You don't need a maxflow, just probably a 68/45 with one of the cross fire or ninja reg will do. Ninja reg can be adjust up to 950 psi, so that should work out nicely for you. 4th. Yes the level 10 does eliminate chop, just post here if you need to know how to tune it, or watch the video on youtube. 5th. I haven't purchase anything from them, the last time i got a new mag i got it from tunaman (tunamart.com). You can also find a lot of different bodies on automags.org and especially if you just want a compact ule type, then rogue carry a few type of body on pblegion.com If you want a brand new mag custom build, then just send an emag to tunaman (tunamart.com). __________________ Feedback http://www.mcarterbrown.com/forums/f...-feedback.html

03-13-2009, 06:45 AM	#5 (permalink)
cheezstake Active Member Join Date: Feb 2009	i think mabe im just going to get a 68 classic then upgrade to my liking. im new to mags but classic mags and rt pros have different rails correct. why is this, are rt pros longer? also will a classic accept an xvalve? __________________ mcb customcockers pbnation AO

03-13-2009, 06:53 AM	#6 (permalink)
idkfa Stock Class Aficionado Join Date: Mar 2007 Location: Vancouver, BC, Canada	All Mag components are compatible with the following exceptions: - RT Classic parts won't fit any other Mag, and vice versa - some rails/bodies have different indents for the screw mount thing (Classic bodies/rails are square, ULE bodies and RT rails are round), but I believe you can mill them to fit if you really wanted. If I left anything out, I am sure someone else will add. __________________ MCB Feedback The PhOG Feedback eBay Feedback Newfoundland Paintball Supply

03-13-2009, 07:35 AM	#8 (permalink)
idkfa Stock Class Aficionado Join Date: Mar 2007 Location: Vancouver, BC, Canada	I cannot go to the AGD store anymore because the ULE Mag keeps whispering my name and telling me to buy it. That is not a bad price either for what is likely the best of mechanical paintball guns. __________________ MCB Feedback The PhOG Feedback eBay Feedback Newfoundland Paintball Supply

03-12-2009, 09:48 PM	#3 (permalink)
going_home Lions, Tigers, and Bears... Join Date: May 2007	Used will definitely be cheaper but I wouldnt be afraid to buy a new one direct from AGD. Tunaman is awesome but he's very slow in returning emails sometimes due to his backlog of markers to tech. You can call or email AGD, they will also send you a Paypal payment request if you want to pay that way but you will pay the extra fees. Airgun Designs USA 401 Florine Court, Cary, IL 60013 Hours: Monday to Thursday 9:00 a.m. - 5:00 p.m. (Central Time) Office Tel: 847-520-7507 • Fax: 847-548-2149 Tech Support Hours: Monday to Thursday 9:00 am to 5:00 pm (Central Time) Tech Support Tel: 847-520-7225 • Tech Support Email: romanr@airgun.com RT Pro ULE with Intelliframe or a Tach One, both have Xvalves with level 10 bolt. Get a ULT trigger kit too.

03-13-2009, 01:06 AM	#4 (permalink)
gunman_2000 Seasoned Member Join Date: Jun 2008	the ULE mag I have, we just ran paint through it last week and I got a hopper and 3 pods off it. She might hav ebeen shooting a little slow, but it'll certainly be enough paint for me. I was going to buy new at some point, but I lucked out and found what I was looking for in the BST's. Check here and AO like the others said, you'll find something.

03-13-2009, 07:29 AM	#7 (permalink)
going_home Lions, Tigers, and Bears... Join Date: May 2007	Rt Classics really dont have anything you can upgrade but the trigger frame and barrel. You will spend more money upgrading then if you just went ahead and bought an RT Pro ULE from the beginning. Parts are more expensive then whole markers.

03-13-2009, 12:24 PM	#9 (permalink)
cheezstake Active Member Join Date: Feb 2009	well i really like the dw dallara rail and the rpg pariah body. so i figure if i start out with a classic then search for the rail and body i will eventrually get both, then all i need to do is get an xvalve, and im done, and thats my perfect mag. __________________ mcb customcockers pbnation AO

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search