Paintball

[PistolRogue]

Originally Posted by Wrathbringer

I'm thinking it was the remote line since you can actually choke the air supply with it. Typically you want to screw the remote line it so that you hear it gassing up, and then another quarter or so turn after. This way you'll have plenty of airflow.

Thats the only other thing I was thinking was that when I used the 88, I screwed the remote valve all the way down, then back out a full turn. The 68 today I just turned it til it started to gas, then one full turn more... I'd retest with the 88 but I ran it down to 1K psi toward the tail of my testing so the results would be skewed anyway.

[Robertsr]

Originally Posted by idkfa

Russ and/or Robert, question for you both (I am still new to HPA). I am using a PE 68/4500, and it has had some bonnet unscrewing issues. If I swap the regulator to a Ninja or Crossfire one, will that fix any issues? I am guessing the bottles themselves are fine.

Thanks.

Yeah, bottles are fine. Nothing wrong there at all.