mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 08-20-2009, 02:31 PM   #1 (permalink)
Post Whore
 
nickakathebest1's Avatar
 
Join Date: Nov 2008
Location: RI

more warp feed help

okay so i got the vibration sensor to work but with the sp-1 it might not be enough uno? so the warp came with an intelli cable one end has the headphone jack the other I spliced the outer sheath and the inner 4 wires my question here is if i take the 4 small wires put 2 and 2 together then put one set on each lead on my micro switch and plug it into the warp will it work to get it to sync with the gun's firing ???
__________________
Quote:
Originally Posted by Looper View Post
Are you allowed to use a warp on an SP-1... won't they revoke your man card...

My Markers:
pre 2K R feed sniper 2
Open class Sterling
Tippmann A5 stealth
nickakathebest1 is offline   Reply With Quote
Old 08-20-2009, 05:30 PM   #2 (permalink)
Marathoner
 
secretweaponevan's Avatar
 
Join Date: Aug 2007
Location: North East Pennsylvania

This should help

__________________
"You don't use science to show that you're right, you use science to become right." -xkcd 701
feedback
secretweaponevan is online now   Reply With Quote
Old 08-20-2009, 06:22 PM   #3 (permalink)
Post Whore
 
nickakathebest1's Avatar
 
Join Date: Nov 2008
Location: RI

it would if i has nid wires mines right thereo n the board not even any solder pools to tap into
__________________
Quote:
Originally Posted by Looper View Post
Are you allowed to use a warp on an SP-1... won't they revoke your man card...

My Markers:
pre 2K R feed sniper 2
Open class Sterling
Tippmann A5 stealth
nickakathebest1 is offline   Reply With Quote
Old 08-20-2009, 06:26 PM   #4 (permalink)
Marathoner
 
secretweaponevan's Avatar
 
Join Date: Aug 2007
Location: North East Pennsylvania

What about the back of the micro switch? Can you solder some jumper wires there? (I don't have an SP1 or else I would know if that wasn't an option.)
__________________
"You don't use science to show that you're right, you use science to become right." -xkcd 701
feedback
secretweaponevan is online now   Reply With Quote
Old 08-20-2009, 06:59 PM   #5 (permalink)
Post Whore
 
nickakathebest1's Avatar
 
Join Date: Nov 2008
Location: RI

Quote:
Originally Posted by secretweaponevan View Post
What about the back of the micro switch? Can you solder some jumper wires there? (I don't have an SP1 or else I would know if that wasn't an option.)
yes i can would that be enough to activate it ?
__________________
Quote:
Originally Posted by Looper View Post
Are you allowed to use a warp on an SP-1... won't they revoke your man card...

My Markers:
pre 2K R feed sniper 2
Open class Sterling
Tippmann A5 stealth
nickakathebest1 is offline   Reply With Quote
Old 08-20-2009, 07:05 PM   #6 (permalink)
Marathoner
 
secretweaponevan's Avatar
 
Join Date: Aug 2007
Location: North East Pennsylvania

It should, it's enough to trip the noid.

I'm looking at the manual and at the solenoid. How does it connect to the board? A socket?
__________________
"You don't use science to show that you're right, you use science to become right." -xkcd 701
feedback
secretweaponevan is online now   Reply With Quote
Old 08-20-2009, 09:01 PM   #7 (permalink)
Post Whore
 
nickakathebest1's Avatar
 
Join Date: Nov 2008
Location: RI

Quote:
Originally Posted by secretweaponevan View Post
It should, it's enough to trip the noid.

I'm looking at the manual and at the solenoid. How does it connect to the board? A socket?
not sureally its a black plastic cover that pops off exposing the noid but its directly on th board
__________________
Quote:
Originally Posted by Looper View Post
Are you allowed to use a warp on an SP-1... won't they revoke your man card...

My Markers:
pre 2K R feed sniper 2
Open class Sterling
Tippmann A5 stealth
nickakathebest1 is offline   Reply With Quote
Old 08-20-2009, 09:08 PM   #8 (permalink)
Marathoner
 
secretweaponevan's Avatar
 
Join Date: Aug 2007
Location: North East Pennsylvania

Best bet would probably be soldering jumpers to the back of the microswitch then.
__________________
"You don't use science to show that you're right, you use science to become right." -xkcd 701
feedback
secretweaponevan is online now   Reply With Quote
Old 08-25-2009, 08:59 PM   #9 (permalink)
VCP
 
Join Date: Aug 2007
Location: (207)

CCM Fan
AKA Fan
Brass N Wood Fan
Are you allowed to use a warp on an SP-1... won't they revoke your man card...

All joking aside,
The AGD Intelli Frames only had a micro switch; no batteries or voltage in those. The emag port to feed a warp puts out a 5v square wave pulse.

http://www.airgundesignsusa.com/down...structions.pdf
http://www.airgundesignsusa.com/down...ntelliwarp.pdf
__________________
"Resist much, Obey little" - Walt Whitman
<\> Feedback Threads:
_/\_ AO, eBay, MCB
secretweaponevan ~ "That wasn't in the instructions. Don't try to outsmart physics. Read and follow the instructions."
secretweaponevan ~ "You did great with following the instructions. Just so you know, that puts you in the top 1%."
Looper is offline   Reply With Quote
Old 08-27-2009, 06:47 PM   #10 (permalink)
Post Whore
 
nickakathebest1's Avatar
 
Join Date: Nov 2008
Location: RI

Quote:
Originally Posted by Looper View Post
Are you allowed to use a warp on an SP-1... won't they revoke your man card...

All joking aside,
The AGD Intelli Frames only had a micro switch; no batteries or voltage in those. The emag port to feed a warp puts out a 5v square wave pulse.

http://www.airgundesignsusa.com/down...structions.pdf
http://www.airgundesignsusa.com/down...ntelliwarp.pdf
ahaha i hope they dopnt i mean i have a pistol full rocket laucher setup and the sp-1 as well as a **** load of paint and grenades for big games that i play if i can carry all that and stil bring hell my man card is gold status haha and yea intelli is simple but on the board heres its a bit harder it works well on my spyder though
__________________
Quote:
Originally Posted by Looper View Post
Are you allowed to use a warp on an SP-1... won't they revoke your man card...

My Markers:
pre 2K R feed sniper 2
Open class Sterling
Tippmann A5 stealth
nickakathebest1 is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Air Gun Designs

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 01:15 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC