Crosman 3357 rebuilding/restoration service.

acrewofone · 08-11-2011, 11:06 PM

I can rebuild/restore your Crosman 3357.

The following will be done to your 3357:

broken, worn or missing parts replaced
frames stripped and repainted
barrels stripped and repainted
new complete valve assemblies
new cylinder detent
new ball detent
new index finger
new hammer spring
new barrel latch rubber
new style lever bushing (metal instead of plastic)
interior workings cleaned, polished and lubricated
marker test fired and adjusted
new CO2 cartridge installed

Cost is $75 (paypal) which includes return shipping via USPS Priority Mail (U.S)

(two important notes):

1. I can't do anything if the ratchet teeth on your cylinder are extremely worn or broken, but the new index finger along with the new cylinder detent should help index the cylinder more accurately.

2. There may be an extra charge if major parts are broken that require machine service to repair. A quote will be given before any work is done.

Turn around time is about 3 weeks from the time I receive your 3357 (it takes 7-10 business days for me to receive parts shipped from Crosman).

PM me to set up the service.

Paypal = acrewofonekia@excite.com

(If you would like references on the quality of my work, contact Sean_Chip, Bow, Automatic_Thrill, CIERA1932, splatmaster12, NSGSplatmaster or ACI_Maverick_18)

NSGSplatmaster · 10-08-2011, 09:19 PM

I'll have some work for you in a month or so.

BuffaloKing · 01-18-2012, 01:24 PM

Just PM'd you.

MikeD007 · 03-13-2012, 01:44 PM

I am hoping you could answer a couple of questions,
My indexing finger does not stay forward, should there be a spring pulling it forward?

Can I just polish out rust in my barrel?

acrewofone · 03-13-2012, 02:30 PM

Quote:

Originally Posted by MikeD007

I am hoping you could answer a couple of questions,
My indexing finger does not stay forward, should there be a spring pulling it forward?

Can I just polish out rust in my barrel?

The plastic spring tab on your cylinder plate is broken, that's what pushes the index finger forward:

and the barrel is just a steel cylinder inside , so polish away...

MikeD007 · 03-13-2012, 08:43 PM

Brilliant. you nailed it without even a picture.

Can you sell me a replacement spring tab?

acrewofone · 03-13-2012, 10:03 PM

Quote:

Originally Posted by MikeD007

Brilliant. you nailed it without even a picture.

Can you sell me a replacement spring tab?

I don't have one in stock right now (currently waiting for my Crosman order of parts to rebuild BuffaloKings' 3357 to come in).

But you can order it direct from Crosman, 800-724-7486, part number 357-035, I think it's only around $1.50 and they only charge $4.00 shipping on any order.

Thecyn · 05-17-2012, 05:18 PM

I might be in the market for a crossmann 3357. Is anyone selling one bored out to shoot the standard .68 paintballs?

Bow · 05-17-2012, 05:21 PM

Quote:

Originally Posted by Thecyn

I might be in the market for a crossmann 3357. Is anyone selling one bored out to shoot the standard .68 paintballs?

Cant do it, at least to the best of my knowledge, there are a few for .62 but .68 is too big, Dukie made a .68 revolver though.

08-11-2011, 11:06 PM	#1 (permalink)
acrewofone Red Headed Step Child Join Date: Jan 2010 Location: Hagerstown, MD	Crosman 3357 rebuilding/restoration service. I can rebuild/restore your Crosman 3357. The following will be done to your 3357: broken, worn or missing parts replaced frames stripped and repainted barrels stripped and repainted new complete valve assemblies new cylinder detent new ball detent new index finger new hammer spring new barrel latch rubber new style lever bushing (metal instead of plastic) interior workings cleaned, polished and lubricated marker test fired and adjusted new CO2 cartridge installed Cost is $75 (paypal) which includes return shipping via USPS Priority Mail (U.S) (two important notes): 1. I can't do anything if the ratchet teeth on your cylinder are extremely worn or broken, but the new index finger along with the new cylinder detent should help index the cylinder more accurately. 2. There may be an extra charge if major parts are broken that require machine service to repair. A quote will be given before any work is done. Turn around time is about 3 weeks from the time I receive your 3357 (it takes 7-10 business days for me to receive parts shipped from Crosman). PM me to set up the service. Paypal = acrewofonekia@excite.com (If you would like references on the quality of my work, contact Sean_Chip, Bow, Automatic_Thrill, CIERA1932, splatmaster12, NSGSplatmaster or ACI_Maverick_18) __________________ Dust Black Empire AXE / Gloss Black Invert Mini Crosman 3357 Revolver / AGA62 Pistol / Tiberius T8 Pistol eBay 588+/0- Feedback New PBNation 155+/0- Feedback Old PBNation 48+/0- Feedback M. Carter Brown 58+/0- Feedback Angel-Owners 19+/0- Feedback TOTAL 870 ALL POSITIVE FEEDBACK! Last edited by acrewofone; 12-17-2011 at 01:47 AM.

03-13-2012, 01:44 PM	#4 (permalink)
MikeD007 Newbie Join Date: Aug 2011	3357 issues I am hoping you could answer a couple of questions, My indexing finger does not stay forward, should there be a spring pulling it forward? Can I just polish out rust in my barrel?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

10-08-2011, 09:19 PM	#2 (permalink)
NSGSplatmaster MCB Member Join Date: Apr 2006	I'll have some work for you in a month or so.

01-18-2012, 01:24 PM	#3 (permalink)
BuffaloKing Newbie Join Date: Jan 2010	Just PM'd you.

03-13-2012, 08:43 PM	#6 (permalink)
MikeD007 Newbie Join Date: Aug 2011	Brilliant. you nailed it without even a picture. Can you sell me a replacement spring tab?

05-17-2012, 05:18 PM	#8 (permalink)
Thecyn Newbie Join Date: Feb 2012	I might be in the market for a crossmann 3357. Is anyone selling one bored out to shoot the standard .68 paintballs?