|Airsmiths on MCB MCB Airsmiths working together to bring you the best in custom paintball work.|
| ||Thread Tools||Search this Thread|
|06-24-2012, 09:37 PM||#1 (permalink)|
Join Date: May 2011
Location: Pensacola, FL
Need some work done, (Anno and Milling)
So, I ruined a feedtube trying to cut a feedhole. I need a nice sidefeed hole cut in this thing.
Those aren't the only thing I'd like to have done. It's pretty much a cut down PTXtreme tube. The cap is black, the tube is silver. The marker is dust black.
If it can get re-annoed to semi-gloss black. I can send the barrel to match it to.
And then there's the optional things. There's a screw holding the endcap on. I'd just like to get it turned into a flush mount set screw. And lastly, only if you want to, Cut a channel in the follower for an o-ring(I'll have it with it).
Is there anyone who can accomplish all this pretty easily without having to send it off to anyone else? I'm in USA, specifically Florida.
Last edited by AsaBerdahl; 06-25-2012 at 02:47 PM.
|Thread Tools||Search this Thread|