mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Airsmiths on MCB (http://www.mcarterbrown.com/forums/airsmiths-mcb/)
-   -   Full auto TPX.... (http://www.mcarterbrown.com/forums/airsmiths-mcb/208376-full-auto-tpx.html)

HEADFRST11 07-17-2012 12:26 PM

Full auto TPX....
 
Anyone think (or know someone) theycould handle modifying a Tippman TPX pistol to be full auto? Hold the trigger and empty a mag. And if you can, can you put in a selector switch to run from single shot to full auto? Just a thought..... Any confident takers???

Hawkeye20 07-17-2012 01:28 PM

.......Why? You'd need to change mags every three seconds :P

That and your efficiency would drop through the floor... 15 or so per 12 gram.



A problem I see is that the rate-of-fire would be WAY too high and you'd chop almost every round. If you just cut the sear that controls its semiautomatic-ness it would be like an uncapped full auto.

HEADFRST11 07-17-2012 01:33 PM

Why? Why not???? :-)

And I agree, I think ROF would need to be monitored so cutting the sear is not feasible. Not in my eyes anyway.

Hawkeye20 07-17-2012 01:46 PM

Yeah, it would basically fire as fast as the spring can bounce the bolt back... which is toooo fast.

You'd basically need a board and solenoid to properly cap the ROF. Which there isn't much room for, UNLESS you were to attach a foregrip to the rail, bore it out, and put the stuff inside that...

HEADFRST11 07-17-2012 10:22 PM

Yeah, bit above my expertise.....

Cowboy 07-22-2012 11:39 PM

There is no sear in a tpx on a t8 yes but not a tpx

LilShank 07-23-2012 12:30 PM

Someone was working on this in the Sidearms section a while ago, can't seem to find the thread now.

tlane77 07-23-2012 01:16 PM

Mr Smith was doing a Tiberius one.


All times are GMT -4. The time now is 10:28 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC