mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Airsmiths on MCB (http://www.mcarterbrown.com/forums/airsmiths-mcb/)
-   -   Angel LED Milling (http://www.mcarterbrown.com/forums/airsmiths-mcb/223891-angel-led-milling.html)

TyeStick 01-18-2013 07:19 PM

Angel LED Milling
 
Hello,

I've got a project LED I'm looking to have milled. Looking for potential smithes that would be interested in taking some work. Also looking for some ideas on what to have milled. Something different, some wicked. Lets get something started!

TyeStick 03-02-2013 05:51 AM

*Bump

Rainman229 03-02-2013 09:23 AM

Led really don't have to much to mill. Only areas that can be milled are the breach and barrel section. And the other problem with old led's is their a bitch to set in the mill. One wrong move and you crushed the lower tubes. Making a angel jig setup is really not worth the time to use once in blue moon.

led eclipse's only had the breach milling

TyeStick 03-02-2013 01:05 PM

I realize that it's no simple project. I also know that the only areas that are mill worthy are the breech, and up. Due to the size of the solenoid, there's not much of anything that can be done to the back. Maybe mill the sight rail as well?

On a side note, it's one of my MAIN markers, so it'll be seeing the field quite often.


All times are GMT -4. The time now is 07:02 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC