mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Airsmiths on MCB (http://www.mcarterbrown.com/forums/airsmiths-mcb/)
-   -   GX-3 Stock Class Mods Needed (http://www.mcarterbrown.com/forums/airsmiths-mcb/247200-gx-3-stock-class-mods-needed.html)

CSLaoch 12-08-2013 10:34 PM

GX-3 Stock Class Mods Needed
 
I think this is the right section, let me know if it isn't.

I'm looking for somebody who can let me know, if the following mods are doable and about how much it would be ($). I have a GX-3 that I'm converting to stock class. What I'd need is to have the body drilled for a reverse phantom feed port and round off the edges near the vert ASA attachment point so it can take 2K+ vert ASAs.

The only problems I see would be the raised areas in front of and behind the feedneck, which would probably need to be cut down to mount the feedblock, and the rail on the back/top getting in the way of the feedblock.

If by some chance there is a way to mount a feedblock facing back on a GX-3 body, I'd be interested, but I figured the only option would be reverse mount because of the rail.

Body looks like this (minus ASA): http://i1054.photobucket.com/albums/.../photo1-14.jpg

Reverse Phantom Feedblock: CCI Phantom Horizontal Feed Port (Delrin) - Reverse - Black

lexiones 12-09-2013 10:04 PM

I could help you out. I've done a few conversions of this sort before. I think your cheapest/easiest option would be to mill the rail and tabs flat. Then, drill and tap both the front and back of the feedport. The standard phantom feedblock can be modified with a second mounting hole to mount either forward or backward. PM me if you might be interested. I can also mill the radius for the vert adapter without a problem.

https://sites.google.com/site/lexion...s/DSC01736.JPG

http://www.mcarterbrown.com/forums/s...ing-build.html

It would be like these two but without the radiused body.

PM me if you are interested. We can discuss a few options and price.

CSLaoch 12-09-2013 10:59 PM

PM'ing

CSLaoch 12-21-2013 10:35 PM

So Lexiones doesn't seem to be replying to my PMs, not sure why. Anybody else interested? Basically just rounding off body @ vert ASA point, milling down rail on body, and tapping for phantom feed block.


All times are GMT -4. The time now is 09:00 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC