Need two grooves milled into Javelin barrel

custar · 05-09-2008, 10:35 PM

I want to put an Apex tip on one of my Javelin barrels. To do that, two grooves are needed on the tip of the Javelin barrel. I know it's not a challenging job, but I need the barrel back by 1 or 2 June so I can take the barrel to D-Day. I do have a stock Apex barrel and tip I can send for a model of where and how deep to mill the grooves.

Is anyone up for this small job?

custar

doc Zox · 05-09-2008, 10:43 PM

have you seen fl^'s mod?
Underground Mod Shop
heres what you need if you go for the milling:

Legion · 05-10-2008, 03:14 AM

Does it need the porting as well?

custar · 05-10-2008, 12:09 PM

Quote:

Originally Posted by Legion

Does it need the porting as well?

I don't think it does. A teammate of mine used a dremel to mill his Javelin's tip. He didn't add any porting, and his works well. I don't have enough confidence in my dremelling skills to do this myself.

custar

doc Zox · 05-10-2008, 11:21 PM

the porting was already on the cci muzzle brake that i had milled to fit the apex

custar · 05-12-2008, 06:08 PM

Quote:

Originally Posted by doc Zox

have you seen fl^'s mod?
Underground Mod Shop

I will measure my Javelin's tip. That would be the most cost-effective alternative if the muzzle is small enough. The tip of the Javelin definitely has 1" of smooth OD from the tip extending backward. Britt's delrin adapter would just fit over that are of the barrel, no? How does it attach to the barrel?

custar

Legion · 05-12-2008, 06:45 PM

Well if its just the grooves i could do it very easily.

custar · 05-15-2008, 07:00 PM

Please shoot me an estimate and your mailing address by PM.

custar

Altec · 05-18-2008, 01:17 AM

If Legion changed his mind I can do it. I've done a couple Apex installs on my own barrels.

Both can be seen here. Ones on a freak, the other is on a CP.
http://i13.photobucket.com/albums/a2...r/100_3125.jpg

coldy13 · 05-23-2008, 04:17 PM

Yeah, they aren't too hard, I put one on my old J&J 2 piece barrels, just had to make a small ring to press onto the end since the tip is small.

05-09-2008, 10:35 PM	#1 (permalink)
custar Seasoned Member Join Date: Apr 2006 Posts: 873	Need two grooves milled into Javelin barrel I want to put an Apex tip on one of my Javelin barrels. To do that, two grooves are needed on the tip of the Javelin barrel. I know it's not a challenging job, but I need the barrel back by 1 or 2 June so I can take the barrel to D-Day. I do have a stock Apex barrel and tip I can send for a model of where and how deep to mill the grooves. Is anyone up for this small job? custar

05-10-2008, 03:14 AM	#3 (permalink)
Legion Minion to Big oil Join Date: Jul 2006 Location: Woods Cross, Utah Posts: 982	Does it need the porting as well? __________________ http://jonesgunworks.net MY NEW SITE!!! Nelson upgrades and replacement parts. Halfblock conversion, halfblock parts,grips, Pump kits and custom mill work.

05-12-2008, 06:45 PM	#7 (permalink)
Legion Minion to Big oil Join Date: Jul 2006 Location: Woods Cross, Utah Posts: 982	Well if its just the grooves i could do it very easily. __________________ http://jonesgunworks.net MY NEW SITE!!! Nelson upgrades and replacement parts. Halfblock conversion, halfblock parts,grips, Pump kits and custom mill work.

05-18-2008, 01:17 AM	#9 (permalink)
Altec Active Member Join Date: Oct 2006 Location: Maryland Posts: 495	If Legion changed his mind I can do it. I've done a couple Apex installs on my own barrels. Both can be seen here. Ones on a freak, the other is on a CP. http://i13.photobucket.com/albums/a2...r/100_3125.jpg __________________ PROJECT'S Confederate Ballers! -Official Avatar Maker-

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

05-09-2008, 10:43 PM	#2 (permalink)
doc Zox Shop Smart,Shop S-Mart Join Date: Jul 2006 Posts: 796	have you seen fl^'s mod? Underground Mod Shop heres what you need if you go for the milling:

05-10-2008, 11:21 PM	#5 (permalink)
doc Zox Shop Smart,Shop S-Mart Join Date: Jul 2006 Posts: 796	the porting was already on the cci muzzle brake that i had milled to fit the apex

05-15-2008, 07:00 PM	#8 (permalink)
custar Seasoned Member Join Date: Apr 2006 Posts: 873	Please shoot me an estimate and your mailing address by PM. custar

05-23-2008, 04:17 PM	#10 (permalink)
coldy13 Newbie Join Date: Sep 2007 Posts: 13	Yeah, they aren't too hard, I put one on my old J&J 2 piece barrels, just had to make a small ring to press onto the end since the tip is small.