Press fit feednecks

PC007 · 06-15-2008, 10:08 PM

With FBM being all but gone. Is anyone else able to do an alternative to the stock feedneck on an 03/04 cocker body? I have 3 of them I need done.

jcurt455 · 06-15-2008, 10:23 PM

lot of people are going with an ego mod. Basicly you remove the stock neck and turn it down to take an ego collar.

PC007 · 06-15-2008, 10:43 PM

What do you mean by that? I would cut off like the top of the feedneck and slide the ego feedneck over the leftover of the original feedneck?

xkpxfatassxx · 06-16-2008, 01:13 AM

Basically but you will need to slim the sides because the ego feednecks aren't exactly big.

kidneythief · 06-16-2008, 01:31 AM

You chuck the gun up and turn the stock feed neck down to accept a female to female ego neck. PM me.

-Jake

hvacman250 · 06-16-2008, 07:19 AM

Takes Ego feednecks. Anyone of the above posting airsmiths can do it for you.

Rainman229 · 06-19-2008, 02:48 PM

Another option is a press in with angel feed neck threads

matt · 06-23-2008, 06:29 PM

Sorry to thread jack, but can any of you here press in angel threads?

06-15-2008, 10:08 PM	#1 (permalink)
PC007 MCB Member Join Date: May 2008 Posts: 173	Press fit feednecks With FBM being all but gone. Is anyone else able to do an alternative to the stock feedneck on an 03/04 cocker body? I have 3 of them I need done.

06-15-2008, 10:23 PM	#2 (permalink)
jcurt455 MCB Member Join Date: Apr 2008 Posts: 155	lot of people are going with an ego mod. Basicly you remove the stock neck and turn it down to take an ego collar. __________________ Halfblock and midblock parts for sale $30 for screw in pin /$35 for push pin. http://www.flickr.com/photos/2320203...7604848599838/ my feed back http://www.mcarterbrown.com/forums/f...-feedback.html

06-15-2008, 10:43 PM	#3 (permalink)
PC007 MCB Member Join Date: May 2008 Posts: 173	feedneck ? What do you mean by that? I would cut off like the top of the feedneck and slide the ego feedneck over the leftover of the original feedneck?

06-16-2008, 01:13 AM	#4 (permalink)
xkpxfatassxx Blah Join Date: Feb 2007 Location: So Cal Posts: 1,291	Basically but you will need to slim the sides because the ego feednecks aren't exactly big. __________________ Winchesters 50rnd Hoppers $4 3.5 tanks w/ valve $23 Dealer for: CCM, CCI, CP, and other misc companies. Purchase here:Snap Paintball I am not the owner of snappb.

06-16-2008, 01:31 AM	#5 (permalink)
kidneythief Lord humungus the Mod Join Date: Mar 2006 Location: Home Finally!!! Posts: 2,372	You chuck the gun up and turn the stock feed neck down to accept a female to female ego neck. PM me. -Jake __________________ "I wish simply to be a decent person, yet I will always fear the retards" -Brian Hindt(geech) "Every man knows he is, basically, a complete sissy compared to Johnny Cash." - Bono LPPC member #24 MCB Moderator Machinist for hire Kidney Machine

06-16-2008, 07:19 AM	#6 (permalink)
hvacman250 www.pbpumpshop.com Join Date: Nov 2006 Posts: 818	Takes Ego feednecks. Anyone of the above posting airsmiths can do it for you. __________________ Feedback

06-19-2008, 02:48 PM	#7 (permalink)
Rainman229 A god in my own mind Join Date: Apr 2006 Location: nj Posts: 2,800	Another option is a press in with angel feed neck threads __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

06-23-2008, 06:29 PM	#8 (permalink)
matt Active Member Join Date: Jun 2007 Location: Orange County, CA Posts: 252	Sorry to thread jack, but can any of you here press in angel threads? __________________ Cheap Stuff MCB Feedback +8/-0 PbN Feedback +69/-0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search