Custom

[f1zz]

Well, I'm looking for someone to convert an 06 dark ego frame to accept an e2 board. I got one of these frames already modded, but it was cut more or less to fit the gun it came with but not my new project, the grip screw holes need to be moved back a little bit to hide the exposed tray. Here is more or less whats up, this:



needs to be trimmed a little bit







it also needs a hole cut for the eblade eye, that will also need to move back a little..like this:



and then the grip frame screw holes







and a little off the top like so



all to achieve this




and get it to fit on a cocker. I got the blue frame that way on another gun, its mostly a home tinkerer job, nothing against it but I would like something a tad nicer and if possible, I would like to get the grip screw holes countersunk. The rear one is more likely but I would also like the one under the grip frame as well, maybe via a custom made reverse countersink? I want to reiterate, I am not looking to clone that blue frame down to the T, the placement of the grip hole screws and cut out for the eblade eye will change, I will need to send the body with the frames. Thanks for your time and response. I am sorry if I went a little verbose.