P68 in to K stock

hockeytown · 07-12-2008, 11:39 AM

I would like to know if anyone could drill the holes necessary to mount a p 68 in a KP stock.

I would also like to know if anyone has the bolt needed for the conversion.

Prices would be nice.

Thanks.

MrBig · 07-12-2008, 11:41 AM

It is the hammer that you need to replace, not the bolt.

hockeytown · 07-12-2008, 11:45 AM

That is what I meant.

I can never get the two straight.

HP_Lovecraft · 07-18-2008, 04:03 PM

Doesnt sheridan refer to the hammer as the "Lower Bolt"? At least, they did with the later guns.

See, your sorta right.

hockeytown · 07-18-2008, 04:09 PM

I sometimes mildly enjoy being somewhat correct.

Chappy · 07-18-2008, 04:10 PM

iirc, chaos dropped a p68sc in to a new style blue streak stock & trigger group with minimal modification. Just a thought, if you search here you might find it, though it might've been the old mcb...

Schmitti · 07-18-2008, 04:11 PM

As far as I know, unless you are lengthening the lower tube you don't have to use a KP hammer.

My pmi1df/kp conversion does not use a KP hammer.

E

07-12-2008, 11:39 AM	#1 (permalink)
hockeytown MCB Member Join Date: Jul 2007 Location: Michigan	P68 in to K stock I would like to know if anyone could drill the holes necessary to mount a p 68 in a KP stock. I would also like to know if anyone has the bolt needed for the conversion. Prices would be nice. Thanks. __________________ My feed back http://www.mcarterbrown.com/forums/f...-feedback.html

07-12-2008, 11:41 AM	#2 (permalink)
MrBig MCB Member Join Date: Apr 2006 Location: East Lansing, MI	It is the hammer that you need to replace, not the bolt. __________________ Over 100 Items For Sale Feedback

07-12-2008, 11:45 AM	#3 (permalink)
hockeytown MCB Member Join Date: Jul 2007 Location: Michigan	That is what I meant. I can never get the two straight. __________________ My feed back http://www.mcarterbrown.com/forums/f...-feedback.html

07-18-2008, 04:03 PM	#4 (permalink)
HP_Lovecraft MCB Member Join Date: Aug 2006 Location: Southern Maine	Doesnt sheridan refer to the hammer as the "Lower Bolt"? At least, they did with the later guns. See, your sorta right. __________________ www.montneel.com My Myspace nonsense "the evidence strongly suggests that neither Billy nor Adam (Smart Parts) could have invented the electronic paintgun" -Garr M. King, U.S. Judge

07-18-2008, 04:09 PM	#5 (permalink)
hockeytown MCB Member Join Date: Jul 2007 Location: Michigan	I sometimes mildly enjoy being somewhat correct. __________________ My feed back http://www.mcarterbrown.com/forums/f...-feedback.html

07-18-2008, 04:10 PM	#6 (permalink)
Chappy CC Team Chump Join Date: Apr 2006 Location: Phillipsburg, NJ	iirc, chaos dropped a p68sc in to a new style blue streak stock & trigger group with minimal modification. Just a thought, if you search here you might find it, though it might've been the old mcb... __________________ My Feedback: http://www.mcarterbrown.com/forums/s...3932#post13932 "They wouldn't pay me more to bury you rich than to bury you poor." Soundgarden

07-18-2008, 04:11 PM	#7 (permalink)
Schmitti Red=Moderator Join Date: Apr 2006 Location: Schen. NY	As far as I know, unless you are lengthening the lower tube you don't have to use a KP hammer. My pmi1df/kp conversion does not use a KP hammer. E __________________ Gone fishing

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search