P68 in to K stock

hockeytown · 07-12-2008, 10:39 AM

I would like to know if anyone could drill the holes necessary to mount a p 68 in a KP stock.

I would also like to know if anyone has the bolt needed for the conversion.

Prices would be nice.

Thanks.

MrBig · 07-12-2008, 10:41 AM

It is the hammer that you need to replace, not the bolt.

hockeytown · 07-12-2008, 10:45 AM

That is what I meant.

I can never get the two straight.

HP_Lovecraft · 07-18-2008, 03:03 PM

Doesnt sheridan refer to the hammer as the "Lower Bolt"? At least, they did with the later guns.

See, your sorta right.

hockeytown · 07-18-2008, 03:09 PM

I sometimes mildly enjoy being somewhat correct.

Chappy · 07-18-2008, 03:10 PM

iirc, chaos dropped a p68sc in to a new style blue streak stock & trigger group with minimal modification. Just a thought, if you search here you might find it, though it might've been the old mcb...

Schmitti · 07-18-2008, 03:11 PM

As far as I know, unless you are lengthening the lower tube you don't have to use a KP hammer.

My pmi1df/kp conversion does not use a KP hammer.

E

07-12-2008, 10:41 AM	#2 (permalink)
MrBig MCB Member Join Date: Apr 2006 Location: East Lansing, MI Posts: 2,050	It is the hammer that you need to replace, not the bolt. __________________ Over 100 Items For Sale Feedback

07-18-2008, 03:03 PM	#4 (permalink)
HP_Lovecraft Post Whore Join Date: Aug 2006 Location: Southern Maine Posts: 2,736	Doesnt sheridan refer to the hammer as the "Lower Bolt"? At least, they did with the later guns. See, your sorta right. __________________ www.montneel.com My Myspace nonsense "the evidence strongly suggests that neither Billy nor Adam (Smart Parts) could have invented the electronic paintgun" -Garr M. King, U.S. Judge

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search