Valhalla won't shoot over 8bps

Stayhuge · 12-06-2011, 08:54 AM

Hi everyone, This may seem like a stupid question, but I have tried everything and with the eyes on, the Valhalla won't shot over 8bps. I have it set on Semi-20bps. When I turn the eyes off, it will go semi uncapped and I hit 20.4 pulling the trigger. Am I missing something? When I played with it last time, I thought that there was something wrond with the trigger, because it was shooting slower than I was pulling the trigger. thought it was the hopper, then maybe a board setting, but with it degassed, and the bolt pushed forward, it goes up to 8.0 then nothing past that. Any help is greatly appreciated.

Next I have to figure out what's wrong with the valve and why it intermittently leaks when I air up. Probably the orings in the RT.

Thanks

diesel_fireman2001 · 12-06-2011, 10:43 PM

Pull the trigger faster

Sounds like your eyes are bad.

Stayhuge · 12-06-2011, 11:43 PM

lol. Yea, took it apart tonight, and found that there was a loose wire on the harness. I am trying to get another harness. Also, might just order another set of eyes, just in case.

Thanks

drewkroeker · 12-21-2011, 01:55 AM

Back when I had a viking and I put the valhalla frame on it I ran into the same problem. I could not get it to shoot over 8 bps; I forget if it shot faster with eyes off. These eyes were working with the previous board that I had in the gun. I seem to remember something in the manual saying that the bolt must be cycling for the eyes to function properly, so maybe the board was unable to "see" the bolt for some reason? Just conjecture and I don't have my viking anymore so I won't be much help, sorry.

12-06-2011, 08:54 AM	#1 (permalink)
Stayhuge Active Member Join Date: Jul 2009	Valhalla won't shoot over 8bps Hi everyone, This may seem like a stupid question, but I have tried everything and with the eyes on, the Valhalla won't shot over 8bps. I have it set on Semi-20bps. When I turn the eyes off, it will go semi uncapped and I hit 20.4 pulling the trigger. Am I missing something? When I played with it last time, I thought that there was something wrond with the trigger, because it was shooting slower than I was pulling the trigger. thought it was the hopper, then maybe a board setting, but with it degassed, and the bolt pushed forward, it goes up to 8.0 then nothing past that. Any help is greatly appreciated. Next I have to figure out what's wrong with the valve and why it intermittently leaks when I air up. Probably the orings in the RT. Thanks __________________ Feedback: http://www.mcarterbrown.com/forums/f...-feedback.html Tippmann A-5 with the works. Great Gun http://www.mcarterbrown.com/forums/m...-upgrades.html Evil M Parts: LPR, Valve, Bolt, Frame; CP Reg, ASA's, Rail, In Yo Face Stock http://www.mcarterbrown.com/forums/m...ml#post1676163

12-06-2011, 10:43 PM	#2 (permalink)
diesel_fireman2001 Mill Masseuse Join Date: Nov 2006 Location: Oregon	Pull the trigger faster Sounds like your eyes are bad. __________________ KILLSHOT KUSTOMS - custom machining My Custom Guns: http://smg.photobucket.com/albums/v6...Custom%20Guns/

12-06-2011, 11:43 PM	#3 (permalink)
Stayhuge Active Member Join Date: Jul 2009	lol. Yea, took it apart tonight, and found that there was a loose wire on the harness. I am trying to get another harness. Also, might just order another set of eyes, just in case. Thanks __________________ Feedback: http://www.mcarterbrown.com/forums/f...-feedback.html Tippmann A-5 with the works. Great Gun http://www.mcarterbrown.com/forums/m...-upgrades.html Evil M Parts: LPR, Valve, Bolt, Frame; CP Reg, ASA's, Rail, In Yo Face Stock http://www.mcarterbrown.com/forums/m...ml#post1676163

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

12-21-2011, 01:55 AM	#4 (permalink)
drewkroeker Active Member Join Date: Dec 2008	Back when I had a viking and I put the valhalla frame on it I ran into the same problem. I could not get it to shoot over 8 bps; I forget if it shot faster with eyes off. These eyes were working with the previous board that I had in the gun. I seem to remember something in the manual saying that the bolt must be cycling for the eyes to function properly, so maybe the board was unable to "see" the bolt for some reason? Just conjecture and I don't have my viking anymore so I won't be much help, sorry.