mcarterbrown.com
 

Reply
 
Thread Tools Search this Thread
Old 08-31-2012, 07:07 PM   #1 (permalink)
Sidewinder Hoarder
 
toymachine's Avatar
 
Join Date: Dec 2010
Location: Fascist Valley

Factory Output of AKA inline Regs

What is the stock factory output of AKA's current inline regs?
  1. Sidewinder = ?
  2. SST = ?
  3. 2-Liter Plus Dual w/ Low Pressure Spring = ?
Much thanks!
toymachine is offline   Reply With Quote
Old 08-31-2012, 07:12 PM   #2 (permalink)
Active Member
 
Join Date: Mar 2008

Quote:
  1. Sidewinder = 0-700psi
  2. SST = 0-400 psi
  3. 2-Liter Plus Dual w/ Low Pressure Spring = 0-350 psi / 250-550 psi w/high pressure spring
^There
__________________
Feedbacks

Looking for:
BPS Reflex parts
MorueM is online now   Reply With Quote
Old 08-31-2012, 10:52 PM   #3 (permalink)
Sidewinder Hoarder
 
toymachine's Avatar
 
Join Date: Dec 2010
Location: Fascist Valley

I meant what they were set at upon leaving the factor, in terms of output, not what the range of their adjustable output pressures. Thanks for your help regardless.

Anyone have the numbers for the output they come set at from the factory? I'm hoping it's standardized, as opposed to random (which I can't imagine it would be)...
toymachine is offline   Reply With Quote
Old 09-01-2012, 01:43 PM   #4 (permalink)
Post Whore
 
Tracker's Avatar
 
Join Date: Apr 2006
Location: Las Vegas NV
Send a message via Yahoo to Tracker Send a message via Skype™ to Tracker

CCM Fan
AKA Fan
i doubt its standardized.. thats why they are adjustable.. also what does it matter? you turn it one way or the other untill you get the right FPS

if the numbers are THAT important to you, build a reg tester, then you will know

Tracker
__________________

^And i did it while wearing a helmetcam^ in 1080P HD if you need proof
Trackers feedback
Tracker is offline   Reply With Quote
Old 09-01-2012, 02:26 PM   #5 (permalink)
Sidewinder Hoarder
 
toymachine's Avatar
 
Join Date: Dec 2010
Location: Fascist Valley

yea, that was what I was thinking I'd end up doing. I'll post back with my results.
...even if they're not standardized out of the factory
still, part of me thinks they'd set the adjuster-screw(s) to a certain length, such as flush or something, but I guess we shall see

thanks Tracker
toymachine is offline   Reply With Quote
Old 09-01-2012, 03:33 PM   #6 (permalink)
Sidewinder Hoarder
 
toymachine's Avatar
 
Join Date: Dec 2010
Location: Fascist Valley

ah, another question:

is the hole opposite the input on the 2L+dual that comes plugged (but not sealed) with a 1/8 plug screw from the factory an output to which I could attach a gauge? or is it just another input?

less word version:

can I attach an output gauge on my 2L+dual?
toymachine is offline   Reply With Quote
Old 09-01-2012, 06:37 PM   #7 (permalink)
Post Whore
 
Tracker's Avatar
 
Join Date: Apr 2006
Location: Las Vegas NV
Send a message via Yahoo to Tracker Send a message via Skype™ to Tracker

CCM Fan
AKA Fan
as far as i know those are inputs, to attach a gauge youll need a reg extender thats been tapped with 1/8th NPT

Tracker
__________________

^And i did it while wearing a helmetcam^ in 1080P HD if you need proof
Trackers feedback
Tracker is offline   Reply With Quote
Old 09-01-2012, 09:15 PM   #8 (permalink)
Sidewinder Hoarder
 
toymachine's Avatar
 
Join Date: Dec 2010
Location: Fascist Valley

thanks! I've also send my inquires to AKA direct. I'll post info from their reply when I hear back monday or tuesday
toymachine is offline   Reply With Quote
Old 09-08-2012, 11:50 AM   #9 (permalink)
Sidewinder Hoarder
 
toymachine's Avatar
 
Join Date: Dec 2010
Location: Fascist Valley

Larry got back to me!

Here's the news:
-From the factory the 2-liter set to about 150 psi;
-& the Sidewinder is set to about 250 psi.

The other hole in the 2-liter is also an input not output.

Regarding good input pressure for AKA regs, tank output psi about double the working psi of your marker (assuming LP - e.g. my ninja used on my thumper has an output of 600psi or so and the output of the 2L I user on her is about 260psi).
is a good place to start.
toymachine is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » AKA

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 05:50 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC