Autococker SCM LPR OD

chopper duke · 02-25-2013, 05:07 PM

Can someone who has one of these measure the OD for me. I'm trying to see if it'll work for a project.

MorueM · 02-25-2013, 06:55 PM

I have 3, measured with a digital caliper, two were .860" and one was .862".. Looks like 7/8" rod with a cleaning cut.

chopper duke · 02-25-2013, 07:18 PM

Quote:

Originally Posted by MorueM

I have 3, measured with a digital caliper, two were .860" and one was .862".. Looks like 7/8" rod with a cleaning cut.

Thank you kindly sir!!

Bartman · 02-25-2013, 07:28 PM

they all have the same diameter body +/- a little, all the parts where inter changeable pretty much.

If you want one to work of I think I have spare laying in a tool tray if you want it.

Bart

chopper duke · 02-25-2013, 07:45 PM

Quote:

Originally Posted by Bartman

they all have the same diameter body +/- a little, all the parts where inter changeable pretty much.

If you want one to work of I think I have spare laying in a tool tray if you want it.

Bart

That would be awesome! I'll PM you.

02-25-2013, 05:07 PM	#1 (permalink)
chopper duke www.Axial-Photography.com Join Date: Jun 2008 Location: Metro ATL	Autococker SCM LPR OD Can someone who has one of these measure the OD for me. I'm trying to see if it'll work for a project. __________________ My: MCB feedback {total = 275+}

02-25-2013, 06:55 PM	#2 (permalink)
MorueM Active Member Join Date: Mar 2008	I have 3, measured with a digital caliper, two were .860" and one was .862".. Looks like 7/8" rod with a cleaning cut. __________________ Feedbacks Looking for: BPS Reflex parts

02-25-2013, 07:28 PM	#4 (permalink)
Bartman MCB Member Join Date: Aug 2007 Location: Campbellsville KY	they all have the same diameter body +/- a little, all the parts where inter changeable pretty much. If you want one to work of I think I have spare laying in a tool tray if you want it. Bart __________________ Bartman The devils Brigade www.compulsivepaintball.com Its always better with a pump, and camo http://www.mcarterbrown.com/forums/f...l#post2603541y

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search