weird problem

Cowboy · 12-04-2007, 10:23 PM

i just got a 04 viking with a was board and also bought a pandora board cause i heard they were pretty good but i tried the stock WAS board and i can only get 13 bps out of it with paint so i switched to the pandora board and the same thing happened and yes the eyes are working they're brand new

kinda stumped here

any help is awsome

thanks

Cowboy

Brewtt · 12-04-2007, 11:30 PM

Hmmmm...

Hopper limitations?

Fresh batteries in marker AND hopper?

Funny color paint confusing eyes?

Trigger adjustment?

Slow fingers?

Correct settings?

All I could think of to check to start with.

Cowboy · 12-05-2007, 08:37 AM

well the hopper is good, vlocity with fresh batteries and the marker has a fresh one

i was useing solid white and solid red paint

trigger is just the way i want it a little play before the activation point

slow fingers? no way i can get 20bps consistantly on my quest with no bounce and on my karnivor with no bounce

thanks

Cowboy

kidneythief · 12-05-2007, 08:41 AM

Have you tried turning the eyes off and firing with no paint? If its blind it should'nt slow down unless the boards are capped.

I wonder if its even physically possible it is to move 2 fingers 20 times in a second?

-Jake

Su8lime Paintball · 12-05-2007, 08:41 AM

I don't know much about eyes (the closest I've got is an NME that's confusing, and the ACE board on my Xmag) but I have to set the Xmag to "1 color" or "2 color". Maybe that's your problem?

Cowboy · 12-05-2007, 09:30 AM

oh kidney its possibler ill try to get a vid

both the boards are capped at 13 without eyes theyre supposed to be "unlimited" rof in normal semi mode

Bartman · 12-05-2007, 10:33 AM

Actualy you have to set the boared upo to be unlimitted.

But back toi the eye's, they may have been pinched when you installed them, and it could be causeing them to not be there.

get a program cable and turn the eyes off and set the ROF at 20 and see whathappens

Bartman

Cowboy · 12-05-2007, 10:47 AM

need to get a program cable but the eyes seem to be working when there's no ball it doesn't fire but when there is it does

and i do have the board set to unlimited

forgot to say that when i put the board into simulation mode it is fast as heck

Cowboy · 12-05-2007, 07:42 PM

may have it tracked down to the eyes.......

12-04-2007, 11:30 PM	#2 (permalink)
Brewtt CHEERS! Join Date: Mar 2006 Location: Northern California Posts: 3,884	Hmmmm... Hopper limitations? Fresh batteries in marker AND hopper? Funny color paint confusing eyes? Trigger adjustment? Slow fingers? Correct settings? All I could think of to check to start with. __________________ Dabbling in the recreational paintball arts since 1991.

12-05-2007, 08:41 AM	#4 (permalink)
kidneythief Lord humungus the Mod Join Date: Mar 2006 Location: Home Finally!!! Posts: 2,322	Have you tried turning the eyes off and firing with no paint? If its blind it should'nt slow down unless the boards are capped. I wonder if its even physically possible it is to move 2 fingers 20 times in a second? -Jake __________________ "I wish simply to be a decent person, yet I will always fear the retards" -Brian Hindt(geech) "Every man knows he is, basically, a complete sissy compared to Johnny Cash." - Bono LPPC member #24 MCB Moderator Machinist for hire Kidney Machine

12-05-2007, 10:33 AM	#7 (permalink)
Bartman Rec Poster Join Date: Aug 2007 Location: Danville VA Posts: 75	Actualy you have to set the boared upo to be unlimitted. But back toi the eye's, they may have been pinched when you installed them, and it could be causeing them to not be there. get a program cable and turn the eyes off and set the ROF at 20 and see whathappens Bartman __________________ Bartman the canadian living over there

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

12-05-2007, 08:41 AM	#5 (permalink)
Su8lime Paintball Banned Join Date: Nov 2007 Location: Maynard, Eastville, and Ludlow Massachusetts Posts: 236	I don't know much about eyes (the closest I've got is an NME that's confusing, and the ACE board on my Xmag) but I have to set the Xmag to "1 color" or "2 color". Maybe that's your problem?