| ||Thread Tools||Search this Thread|
|07-25-2009, 06:12 PM||#1 (permalink)|
Join Date: Jun 2006
Problem with my first viking
Hello guys, I'm a mag guy and decided to get a decent, Non SP, electro but my first viking is killing me. I aired up this viking I bought from a local guy in ATL and it will cock fine, but I think that the noid isn't working right. It's an 03 viking w/ a pandora board. I believe the problem is either the board or the noid. I took the grip frame off to see if everything was plugged in and the first thing that made me think was wow, it's a MAC noid w/ 2 inputs, but it is plugged into the 3 input plug, w/ one input missing. I took out my multimeter and saw that the outputs for the 3 one has two that are the same so I figure that, that should work but the thing that makes me wonder is when I keep the trigger pulled it will go up from 0.2 Volts to around 0.34 volts... The MAC noid says that it takes 6V and 3W, figuring the equation P=IV that either has to be a lot of current or my board just isn't pushing the juice needed to turn the noid on... I was hoping to use this thing next weekend at arkenstone down here, but as it looks I will probably be shooting the Tac or my trusty phantom. Give me a hand guys,
|07-26-2009, 06:15 PM||#2 (permalink)|
Join Date: Sep 2008
Sounds like its messed up.
And it also sounds like you are a little out of your league.
I would reccomend sending it to jared at DC Destructive Customs
He will tech and tune it for a good price, and you won't have to touch it for years - well worth it! I just sent 2 excals to him for this service.
|07-28-2009, 02:42 AM||#5 (permalink)|
Yes, that is a joke ---->
|Thread Tools||Search this Thread|