Paintball

[capitalpaintball]

I recently picked up an Assassantor pump with all the internals a wintec trigger frame and bushmaster style pump arm, but no barrel.

Does anyone know what thread, if any, fits this gun?

I have tried every thing in my store and a few odd balls I own and nothing fits.
its not Spyder, Cocker, Tippmann, Icd, Impulse, Shocker, Angel, Sterling, Raptor, Phantom, Traccer, Diablo, Derringer, Radar, Master, or Taso.

The Taso Vindicator barrel is the closest, having the right breach depth and width, but the threads are too fine for the Assassinator and it gets stuck after 2 turns.

Any help would be appreciated
and I would be willing to buy a barrel that would fit it.
Thanks
David C. Burns
Capital Paintball
853 Tiogue Ave
Coventry R.I. 02816
401-823-5402

[bacci paintball]

I might have an extra stock barrel.
I will check around but it might take me a few weeks, pm me if you don't hear from me.
-Dan

[capitalpaintball]

Thanks

I was told you might have one. Its a Bore drop version, which im told is a different barrel thread then the breach drop. no rush, just let me know what you have.
Thanks
Dave

[THE-SHOOTIST]

F1 Illustrator

[russc]

Aren't f1 threads the same as raptor, which he tried?

[capitalpaintball]

I want to thank everyone who gave me info on the barrel thread.

I ended up making one from a stock Angel barrel. It was the closest thread, and when screwed in it went 2 full rotations but the breach section was to long.
So I took my friends stock barrel and cut about a quarter inch off the base and tried again, it went about 2 and a half turns and started to bind so I decided to grind of some threads until it threaded in smooth. after some work I ended up with 3 theads left on the barrel and it threads in like butter. 4 and a quarter rotations.

The gun is a bit of a mutt with a Wintec trigger frame a bushmaster style pump arm and an Infinity series barrel, but it pumps so smooooth and shoots beautifully. the action is so smooth if I dont put an elastic around the breach to the 2 pump screws it will just slip back and forth chambering ball after ball Except for the fact that the anodizing is fadeing on the body it is deffinately the best looking Assassinator I have seen.

The only thing left is to create some kind of anti double feed because sometimes it likes t chamber 2 or more rounds when your shooting.