mcarterbrown.com  

Ask The Experts You ask the tough questions

Reply
 
Thread Tools Search this Thread
Old 05-17-2006, 08:30 PM   #1 (permalink)
I am not a macodomy!!
 
caplucky's Avatar
 
Join Date: Mar 2006
Location: Erie, Pennsylvania U.S.A.

Some questions from a new Mag owner

Well just got my very first Mag and of course I have a few questions.
First off the rear part of the reg seems to twist counter clockwise when I fire, I will twist it so the words MINIMAG line up and after a few rounds it shifts itself down so the MIN is not lined up with the IMAG lettering.
Is this normal or something to worry about? Seems to fire and cylcle allright and I was able to chrono it in with little problems.
Second, what kind of routine maintenance should I keep up with on it. And what kind of spare parts should I keep, springs or trigger sear assembly?
And finally what brand barrels are the best for a Mag, I have the 8" stock and a Smart Parts 14" teardrop(progressive?) should I pick up more or should that be good.
I might have to get me a few more of these Mags, been awhile since I used one and forgot how cool they were. So feel free to post up for sale any Mags you got lying around.
caplucky is offline   Reply With Quote
Old 05-17-2006, 08:58 PM   #2 (permalink)
terrible speller
 
knightmare96's Avatar
 
Join Date: Apr 2006
Location: North Central Indiana
Send a message via AIM to knightmare96

Only parts you should need are the o-rings/reg seat, and it is rare to need replacing. Your reg should not be turning when you fire. if it is just a little bit and then stopping, I wouldnt worry too much, but if it continues to turn then I'd do something about it. (Might try a little, and I do mean very little blue locktite on the threads of the reg) VERY LITTLE

As for Barrels, its the same with anygun, you want a good boresize to paint match. I have a J&J kit, and some oldschool dyes for mine. They tend to work well. Plus it depends if you want a loud mag, or a quiet one. They all seem to have different personalities. I have one MINI that is quiet as can be.
__________________
Guns
knightmare96 is offline   Reply With Quote
Old 05-17-2006, 10:42 PM   #3 (permalink)
I am not a macodomy!!
 
caplucky's Avatar
 
Join Date: Mar 2006
Location: Erie, Pennsylvania U.S.A.

Thanks for the info, the reg just moves a fraction of an inch and stays. If I twist it so the lettering matches up level it ends up going back to that spot and staying there.
So just a few drops of oil in the asa and it should be fine, got to love a marker with that kind of quality.
Yeah the SP barrel is quiet as a mouse fart, remarkably quiet at that.
caplucky is offline   Reply With Quote
Old 05-17-2006, 11:41 PM   #4 (permalink)
chuff chuff
 
Hobbes's Avatar
 
Join Date: Apr 2006
Location: Hudson, NH
Send a message via AIM to Hobbes

It is normal for the reg to turn like that, nothing to worry about. For it to turn any further the pin in the regulator that slides into the rail would have to be missing, which is just about impossible.

As far as barrels go...With LVL 7 it likes to chip the next ball in the stack and in general wack paintballs pretty hard so I prefer to use a short and large bore barrel (like the stock Minimag) to help prevent barrel breaks. Make sure you have the parabolic powerfeed plug, that will help the paint feed a lot better (if it's the parabolic plug it will have 2 set screws on it).
Hobbes is online now   Reply With Quote
Old 05-18-2006, 08:19 AM   #5 (permalink)
King of the OFG
 
Robertsr's Avatar
 
Join Date: Apr 2006
Location: Waynesboro, VA
Send a message via MSN to Robertsr

Kilt Fan
As far as parts go, you can score yourself an Automag parts kit for about $15.00 still that will have every o-ring, seal and nubbin that you need. Personally I've used one piece out of my various parts kits in 5+ years of owning several mags. They work well as long as you don't mess with them.

After-game maintenance consists of wiping off the excess paint, and shooting some oil through the system.
__________________
MicroMags 'R Us

FEEDBACK
Robertsr is offline   Reply With Quote
Old 05-18-2006, 05:48 PM   #6 (permalink)
I am not a macodomy!!
 
caplucky's Avatar
 
Join Date: Mar 2006
Location: Erie, Pennsylvania U.S.A.

Thanks guys.
I do have the plug with the set screws, after I cleaned out the two holes and found the hex heads.
What's the deal with the parabolic feed plug?
caplucky is offline   Reply With Quote
Old 05-18-2006, 10:33 PM   #7 (permalink)
I'll split your arrow!
 
mark's Avatar
 
Join Date: Mar 2006
Location: Rural northwestern Illinois
Send a message via AIM to mark Send a message via MSN to mark

It has a steady curve to it insted of kind of flatening out at a point. I described that not too goo, or fomend that sentence the same way for that matter. I've seen a picture compairing the two before, now to see if I can't find it again.
__________________


1. hurricane
An temporary alliance formed between the ocean and the sky with the goal of killing people. The ocean's ability to attack the land is limited, so it lends the sky some of its water and energy so it can assault people farther inland then it normally could.
Hurricanes are far more powerful then the storms the sky creates on its own. They are just another reason the ocean must be destroyed.
mark is offline   Reply With Quote
Old 05-18-2006, 11:03 PM   #8 (permalink)
I am not a macodomy!!
 
caplucky's Avatar
 
Join Date: Mar 2006
Location: Erie, Pennsylvania U.S.A.

Yeah now that you mention it I do have one or two of the ones with the flat end, and this one is curved but why the set screws?
caplucky is offline   Reply With Quote
Old 05-19-2006, 06:45 PM   #9 (permalink)
Active Member
 
Walrus's Avatar
 
Join Date: Apr 2006
Location: Near Nashville, TN
Send a message via MSN to Walrus

I agree with everyone on this. Generally a few drops of oil in the asa (and I tend to put a few on the bolt itself so the spring won't wear on it as bad). Also, just like everyone else has stated, the barrels are hit and miss. Sometimes you get a good one, sometimes you don't. I do have a 10" BOA barrel for sale if you are interested. One of the best barrels I ever owned for my Mag, I just don't think that having 5 barrels and two of the same size is a practical idea when I don't get to play too much right now. It shot better than the 16" All American I had, my 14" and 8" J&J. It was close to my 12" DYE, but I like the finish on DYE better.
__________________
"How would you like one across your lip?" - Fred G. Sanford

My Gallery

History: Line SI Bushmaster; PMI-3; VMX; '97 Autococker; KP-3; Enforcer 2(possible SWARM); Spyder Sonix; Monteneel Z-1; PGP 2K; BBT Typhoon; 2k1 SP Impulse; SP MiniMag; another PMI-3; VM-Magnum; Blazer #153; Pump MiniMag; Thrasher ULE Emag; Cool Camo Micromag; '94-'95(?) Evolution Minicocker; '95 Evolution Autococker; Blazer #710; CNC X-Mag; Gold Rush Micromag; Jungle Sunset Micromag; Wild Tiger Micromag
Walrus is offline   Reply With Quote
Old 07-23-2006, 12:07 AM   #10 (permalink)
MCB Member
 
K_Obeastly's Avatar
 
Join Date: Jul 2006
Location: Clinton, MO

I am going repeat the above with a little extra

for lubing, a few drops in the ASA or the quick disconnect (if you have one) at the valve and some dry firing is all it really takes. As for myself I would completely break it down every 2 months or so and clean out everything.

many people have said not to break it down unless it is malfunctioning. Some would say that you should stay out of the reg unless it starts giving you problems like really hot first shots. If you're not comfortable messing with the internals of the reg then I would suggest staying out of it untill you have to get into it.

there are some lubes I would recommend not using. in my experiance the greases like dye slick lube or shocker lube will kill your mag untill you get them out and relube with oil. I used dye slick lube one day and was having trouble with the trigger returning forward. I dripped a couple of drops of oil in and that loosened up the slick lube enough to get it running. after a few hundred rounds the slick lube was causing problems again.
K_Obeastly is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » Ask The Experts

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 06:49 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC