|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|02-14-2010, 03:11 AM||#1 (permalink)|
Join Date: Jun 2006
Slide check oring size?
Im not sure the who made the slide check as it is not new but I need to replace the little black o ring inside. Does anyone know if it is a standard size and if so what that size might be?
Team On Target
|02-14-2010, 08:03 AM||#3 (permalink)|
Shi Tamagutsu Ka
Join Date: Apr 2006
Location: the group W bench
I used to have the problem of different slides having different size rings.
I went to strictly ANS because they ARE the same as tank rings.
But the old ones could be anything, really. All you can do is take the parts to the hardware store and match 'em up.
CT co-ordinator, Paintball Marshals
PTI #2691 ~ C1, C2, C5, C5a, C6
|02-14-2010, 12:26 PM||#4 (permalink)|
Corp Por, Kal Vas Flam
Join Date: Jul 2008
Location: Spokane, WA
the last slide check I repaired was something like a -011 or -012, and tank orings are -015
In reality there are probably ten different slide check oring sizes. A picture with sometime to reference size (such as a ruler) would help a ton.
|02-14-2010, 01:11 PM||#5 (permalink)|
la la la la revolution
Join Date: Oct 2006
I got tired of replacing slide check o-rings, and bought a CP on/off to replace my remote's on/off. Easy to turn, it purges the line, and the o-rings take ages to wear out. I bought a bunch from oringmonkey.com and haven't had to replace one yet.
Apparently there are some really good slide checks (either that or the users are deaf to that tiny hissssssssssss), but I'm tired of wasting money on them.
|Thread Tools||Search this Thread|