|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|02-20-2010, 03:20 PM||#1 (permalink)|
Join Date: Feb 2010
Location: Los Angeles
I hate to do this...but there is no more moody's and all search has come up with are links to now defunct websites...
My Karnivor Regulator is leaking out of the bottom. The bolt in there has gotten a bit rusty from the moisture in my garage, what should I do to fix it?
I would like to take apart the reg, but i have no idea what i'm doing. The Karni has a delrin bolt that people have told me NOT to lube, so what should i do about the reg leak? Dow 55? Plumbers teflon tape?
Any help appreciated!
|02-20-2010, 03:47 PM||#2 (permalink)|
Page 14 should help with a diagram for putting the parts in place
As far as lube I always use palmers oil, or AKA extreme lube.
Add some oil to the orings and piston while you put it all back together and add air and shoot to distribute. You may also need a rebuild kit which can be found here
Wgp black magic regulator - Shop sales, stores & prices at TheFind.com
Good luck, its not to hard to do,
|02-20-2010, 04:00 PM||#5 (permalink)|
adult film watcher
1. take the top off
2. gut out the internals (remember how they go back in)
3. clean them (change orings if you have to)
4. re-lube them
5. slap them back in
|02-20-2010, 04:58 PM||#6 (permalink)|
DSL is new here
Join Date: Aug 2009
Location: Sandown, NH/ Worcester, MA
and dont put grease on the delrin bolt, just a drop of synthetic air tool oil on each oring.
WPI BS/ME '12 MS/ME '13
Gear Bag Sale!
Take my drop box referral and we both get an extra 250 Mb free!
|Thread Tools||Search this Thread|