Rt mag lvl 10 prob

Uranus · 02-22-2007, 03:08 AM

Well I just installed the lvl 10 kit on my Rt and the lvl 10 part of it works great, but it doesn't want to shoot fast anymore, it just makes a hiss and comes back real slow. It works just fine doing 3 to 5 shots a second, but after that naadaa.

Any Idea's

thanks Guys

Chris

FeedTheDogg · 02-22-2007, 03:26 AM

to me...it sounds like too small of a carrier size. causes friction on that little thingy on the bolt that goes in the powertube and makes it cycle slow....someone correct me if im wrong.

AngelChaser · 02-24-2007, 09:16 AM

Sounds to me like too small of a carrier as well. It's causing a slight amount of bolt-stick. I would suggest taking it all the way apart and starting over with the L-X install. I always go with the bigger carriers and step down until it stops leaking. If you go over to Automags.Org they have an excellent setup guide in the resources section. And should that not help or cure the problem, then there is a L-X specific trouble thread.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

02-22-2007, 03:26 AM	#2 (permalink)
FeedTheDogg Active Member Join Date: Jul 2006 Location: Carlsbad, CA	to me...it sounds like too small of a carrier size. causes friction on that little thingy on the bolt that goes in the powertube and makes it cycle slow....someone correct me if im wrong.

02-24-2007, 09:16 AM	#3 (permalink)
AngelChaser MCB Member Join Date: Feb 2007	Sounds to me like too small of a carrier as well. It's causing a slight amount of bolt-stick. I would suggest taking it all the way apart and starting over with the L-X install. I always go with the bigger carriers and step down until it stops leaking. If you go over to Automags.Org they have an excellent setup guide in the resources section. And should that not help or cure the problem, then there is a L-X specific trouble thread.