Paintball

[grande]

Bolt upside down

[Railgun]

Originally Posted by Chappy

I'm trying to wrap my head around the idea "at 3 fps the ball wouldn't make it out of the barrel." Since fps is measured at the muzzle, this logic is inherently flawed.Am I wrong here?
I

Yeah, you're right. The guy was using his literary license...

A ball rolled across the floor like a marble is doing about 3 feet a second.

[BigBalla23]

You're right guys. The balls are just filling up the barrel. I've checked the bolt several times, and I'm sure that it's not upside down. Also, the back block is cycling hard, but it no air is getting into the chamber to shoot the balls. As far as upgrades go...Just a double trigger hinge frame and an ultralite barrel. Sorry it took so long to reply. Also, I've checked the velocity on four different chronos, and it rarely even registers on them. Thanks for the help you've already given me.

[Walking_Target]

you sure that your valve isn't siezed, or for that matter, the timing is right?


i might recommend removing the backblock or just the hoses from the 4-way, then manually pulling the cocking rod back and firing. if it fires normally, than just re-do the timing, if it does not, you have a more serious issue that you need to look into.