|
             |
 |
|
| Ask The Experts You ask the tough questions |
 |
| | LinkBack | Thread Tools | Search this Thread |
02-24-2007, 08:17 PM
| #1 (permalink) |
| Luddite  Join Date: Feb 2007 Location: Pasadena, CA  | Palmer Rock Question I've a got a palmer rock on my '96 cocker thats sprung a leak. I can't get it to stop bleeding (it's more than a bleed, seems like full pressure) out of the relief hole. Any suggestions on a fix or should I just send it back to palmer? If the only fix is to send it back how much would it cost? Cheers, Kenny Last edited by wanderlustre; 02-24-2007 at 09:09 PM.. |
|  |
|
02-24-2007, 10:13 PM
| #2 (permalink) |
| Pump Gun Dealer  Join Date: Mar 2006 Location: Pender Island, BC  | You could send it back to PPS, since all their regulators are covered under Glenn's lifetime warranty. But the culprit is the plunger o-ring, which is a -012 o-ring that can be accquired from a hardware store or hydraulics supply shop. It's a pretty simple fix, and if you've got the tools to take the reg apart it's quite doable on your own.
__________________   |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
