Traded for some old brass.... what model is it? - Page 2

c6quad · 02-28-2007, 02:12 PM

yes. your PGP valve tool will work on these guns too.

Pepper · 03-02-2007, 10:39 AM

Ok on one of my PMI's I have a peace of copper pipe shoved into the DF. the OD is .88 should I just leave it in there for an elbow or should I take it out. The reason why im asking this silly Q is I never see any of yalls markers with a hopper on it... what kind of hopper or elbow/hopper combo do I use?

Wharf Rat · 03-02-2007, 10:54 AM

The bottom one looks like a pursuit pistol from what I can see of it. If it has a short, solid bolt that is the same length as a PGP then that's what it is. If the top tube magazine was still on it, it would be worth a bit, but most of them had the plumbing pipe hack job done to accept a hopper. PMI II's were the same way - Sheridan made those two guns with constant air, but a 10 round magazine (dumb, huh?) and people wanted to put more paint on top of them.

The second gun has battle grips, which are worth a little on their own. The best place for Sheridan info is PGPOG and the archive stuff put together by Kampfer.

Nice guns -

c6quad · 03-02-2007, 03:06 PM

Quote:

Originally Posted by Wharf Rat

The bottom one looks like a pursuit pistol from what I can see of it. -

i'll have to argue with you on that Peter.

on Pursuit Pistols, the feed port is directly in line verticaly with the grip panel screw. you can see that the gun in the second pic has the feed port way forward of the grip panel screw which is the same found on PMI-1s.

Pepper · 03-02-2007, 04:08 PM

Both are PMI 1's, any input on my hopper problam?

Schmitti · 03-02-2007, 05:25 PM

Any hopper will be fine... go with an elbow (like an old vlbow) that has the removable collar inside one end... you could then remove the piece wedged in the feed and fit the elbow over the 1" od feed neck (which is what is on the gun)

E

Wharf Rat · 03-02-2007, 11:42 PM

my bad!

I should know better than to disagree with you, Chad. I looked at the pix on my old laptop and couldn't see clearly.

THey are nice guns, and would polish up nicely. Peter

c6quad · 03-03-2007, 01:14 AM

it's an easy mistake Peter.

hell, i had to double check it myself and grab one of my Pursuit pistols to make sure.

03-02-2007, 10:39 AM	#12 (permalink)
Pepper Seasoned Member Join Date: Oct 2006 Location: Next to the salt	Ok on one of my PMI's I have a peace of copper pipe shoved into the DF. the OD is .88 should I just leave it in there for an elbow or should I take it out. The reason why im asking this silly Q is I never see any of yalls markers with a hopper on it... what kind of hopper or elbow/hopper combo do I use? __________________ "The man who trades freedom for security does not deserve nor will he ever receive either." -- Benjamin Franklin

03-02-2007, 10:54 AM	#13 (permalink)
Wharf Rat Galactic Overlord Join Date: Apr 2006	The bottom one looks like a pursuit pistol from what I can see of it. If it has a short, solid bolt that is the same length as a PGP then that's what it is. If the top tube magazine was still on it, it would be worth a bit, but most of them had the plumbing pipe hack job done to accept a hopper. PMI II's were the same way - Sheridan made those two guns with constant air, but a 10 round magazine (dumb, huh?) and people wanted to put more paint on top of them. The second gun has battle grips, which are worth a little on their own. The best place for Sheridan info is PGPOG and the archive stuff put together by Kampfer. Nice guns - __________________ Scourge of the Spaceways

03-02-2007, 04:08 PM	#15 (permalink)
Pepper Seasoned Member Join Date: Oct 2006 Location: Next to the salt	Both are PMI 1's, any input on my hopper problam? __________________ "The man who trades freedom for security does not deserve nor will he ever receive either." -- Benjamin Franklin

03-02-2007, 05:25 PM	#16 (permalink)
Schmitti Out and about Join Date: Apr 2006 Location: Schen. NY	Any hopper will be fine... go with an elbow (like an old vlbow) that has the removable collar inside one end... you could then remove the piece wedged in the feed and fit the elbow over the 1" od feed neck (which is what is on the gun) E __________________ Gone fishing

03-02-2007, 11:42 PM	#17 (permalink)
Wharf Rat Galactic Overlord Join Date: Apr 2006	my bad! I should know better than to disagree with you, Chad. I looked at the pix on my old laptop and couldn't see clearly. THey are nice guns, and would polish up nicely. Peter __________________ Scourge of the Spaceways

02-28-2007, 02:12 PM	#11 (permalink)
c6quad MCB Member Join Date: Apr 2006 Location: NC	yes. your PGP valve tool will work on these guns too.

03-03-2007, 01:14 AM	#18 (permalink)
c6quad MCB Member Join Date: Apr 2006 Location: NC	it's an easy mistake Peter. hell, i had to double check it myself and grab one of my Pursuit pistols to make sure.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search