Valve Tool, P 68AT

Tank · 03-01-2007, 09:23 PM

I was just wondering if anyone knew if this would work for the Sheridan P 68 AT?
https://www.palmer-pursuit.com/ecom/...c0177383bcdbfe
Are there any other places that sell them?

Can someone also explain how to use the tool to tune/take out the valve?

Thanks

Pyrate Jim · 03-01-2007, 09:39 PM

The valve pin sticks up out of the valve and has a threaded outside.
The jam nut holds the valve in place and goes around the valve pin.
There is usually a taper screw under the valve that must come out as well.

The square end of the tool will go around the pin and fit into the jam nut to unscrew it.
The other end of the tool should be a female thread that screws onto the end of the protruding valve stem to pull it out. The holes in the side of the tool are meant for a T-handle.

MrBig · 03-01-2007, 10:24 PM

Big Matt has them for $7 + shipping if you can get a hold of him:
http://mad-customs.com/products.htm

American Paintball has them for $18.95 + shipping on his site:
http://www.rcpaintball.com/e-commerc...-catalog7.html

Many gun smiths that work on Sheridan pellet guns sell them.

Jari Kurri · 03-02-2007, 01:19 PM

Quote:

Originally Posted by MrBig

American Paintball might have some, although I did not see them on his site:http://www.rcpaintball.com/index.html

I found it under "other accessories".

03-01-2007, 09:23 PM	#1 (permalink)
Tank Paintball sooo good. Join Date: Feb 2007 Location: Mississauga, Ontario, Canada	Valve Tool, P 68AT I was just wondering if anyone knew if this would work for the Sheridan P 68 AT? https://www.palmer-pursuit.com/ecom/...c0177383bcdbfe Are there any other places that sell them? Can someone also explain how to use the tool to tune/take out the valve? Thanks

03-01-2007, 09:39 PM	#2 (permalink)
Pyrate Jim Active Member Join Date: Apr 2006 Location: the group W bench	The valve pin sticks up out of the valve and has a threaded outside. The jam nut holds the valve in place and goes around the valve pin. There is usually a taper screw under the valve that must come out as well. The square end of the tool will go around the pin and fit into the jam nut to unscrew it. The other end of the tool should be a female thread that screws onto the end of the protruding valve stem to pull it out. The holes in the side of the tool are meant for a T-handle. __________________ CT co-ordinator, Paintball Marshals http://www.pbmarshals.com/ PTI #2691 ~ C1, C2, C5, C5a, C6

03-01-2007, 10:24 PM	#3 (permalink)
MrBig MCB Member Join Date: Apr 2006 Location: East Lansing, MI	Big Matt has them for $7 + shipping if you can get a hold of him: http://mad-customs.com/products.htm American Paintball has them for $18.95 + shipping on his site: http://www.rcpaintball.com/e-commerc...-catalog7.html Many gun smiths that work on Sheridan pellet guns sell them. __________________ Over 100 Items For Sale Feedback Last edited by MrBig; 03-02-2007 at 10:30 PM..

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search