|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|03-05-2007, 12:29 PM||#1 (permalink)|
12V Revy with "Shredder" board - What does this mean?
I just purchased this loader:
The seller had this to say:
Did I in fact purchase another Turbo Revy? From the picture, I can not tell if the on/off is a push button or toggle switch, but it appears to be a toggle.
Any help would be great.
|03-05-2007, 01:07 PM||#2 (permalink)|
Cobra Paintball Fanatic
It looks like a pretty standard revy from the pic.
I'm guessing he's just changed the internal board. I thought the shredder was just an aftermarket board, so its not like you'd see a hopper shell that said something like "shredder inside".
Maybe you could get a clearer description from the seller in an email.
When will these idiots learn that just ending a paragraph with 3 exclamation points does not make up for the lack of punctuation in the first 5 lines.
|03-05-2007, 01:10 PM||#3 (permalink)|
I understand that you could not tell from the outside unless it was a Turbo Revy, in which case would have a push button on/off rather than a switch.
My real question is, what is a Shredder board? Is it any different than a stock or X-Board?
Thanks for the input Scrap.
|03-05-2007, 01:50 PM||#5 (permalink)|
Icognito Remiss Firebrand
there were 18v revies, most VL3000s are 18V infact. The board sent a full 18 to the servo to ha it spin faster. They tended to burn out servos as a primary problem, and then the 12v board came out.
As far as I know measuting the servo output voltage from the board is the best way to know, it should be either almost 12 or almost 18.
Things Im looking for:R/C WW1 Planes
|03-05-2007, 02:39 PM||#6 (permalink)|
Join Date: Apr 2006
Location: Fort Wayne, IN
As I am told the name shredder more applies to how the paddles would crush paint in the hopper instead of just mixing/agitating.
So I cant see it being a beneficial board to have, Also with the advent of the 12 volt output boards the batteries lasted longer as a result of some circuitry work.
18V revy board = bad on paint and batteries.
I wish those 9v 200 round hoppers would come out. (supposedly for the maxx 55) They hold 100 .68 rounds.
|03-05-2007, 03:10 PM||#7 (permalink)|
Join Date: Aug 2006
Location: Southern Maine
My impression is that the only difference between the original 18v Shredder board, and the later 12v Revvie boards was that the 12v boards had a voltage regulator to bump the 18v down to 12v.
The problem primarily being that the 18v systems burned out motors. Rather badly.
Lots of the hopper mods you see on PBN is simply bypassing the voltage reg to increase motor speed... which also ends up burning out the motor.
|03-05-2007, 03:53 PM||#8 (permalink)|
King of the OFG
I ran a shredder for years before I sold the VL3000 to a tanker.
I personally believe the burn out hype was somewhat hype-ish.
The "Shredder” term wasn't a pejorative either. Back in the day it was a skiing or skating term, and was considered "agg".
MicroMags 'R Us
|03-06-2007, 12:01 AM||#9 (permalink)|
Thanks for all the help guys; nice to know that some of you have some knowledge on the topic.
Try reading it word for word... It'll make you cry.
|Thread Tools||Search this Thread|