mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Ask The Experts (http://www.mcarterbrown.com/forums/ask-experts/)
-   -   pump parts (http://www.mcarterbrown.com/forums/ask-experts/157428-pump-parts.html)

uhutac 04-05-2011 10:12 PM

pump parts
 
Hi, I was wondering if there is somewhere where i can find a list of different pump frame bodies and other parts. I want to look into making a pump from scratch.
Anything would help thanks

PAINTBALL GUY 3 04-05-2011 10:16 PM

I'm sorry if this sounds bad, but you might as well have asked " I want to build a car, where can I buy the parts?"

What kind of pump do you want to build? Sheridan, Nelson, Cocker, ect.?

uhutac 04-06-2011 01:06 AM

cocker

Jinx 04-06-2011 01:44 AM

Quote:

Originally Posted by uhutac (Post 1774173)
Hi, I was wondering if there is somewhere where i can find a list of different pump frame bodies and other parts. I want to look into making a pump from scratch.
Anything would help thanks

any cocker body will work. you just need to know if its pre2k or 2k+ or a mini (the ones without the vert asa)

as for pump kits, there is an extensive review on here somewhere...

dutchy 01-27-2013 09:44 AM

I also want a list what is in a sniper.pre 2k past 2k and mini

Need it for the ulitmate poo build.

Thanks,

redlaser666 01-27-2013 11:22 AM

The components for pre and post 2K are all mostly the same, the only big difference is the threads for the pump guide rod and in some cases the velocity adjuster in the rear.
You would need:
- Body, back block, detent, vert asa, vert asa 12pt screw and o-ring
- Pump, gide rod, pump rod
- Internals: Valve and guide, Valve retaining screw, valve jam nut, hammer, velocity adjuster, cocking rod, plus springs and O-rings
- You also need a frame and maybe a beaver tail

- also a bolt


Hope this helps


All times are GMT -4. The time now is 07:55 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC