|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|04-05-2011, 11:16 PM||#2 (permalink)|
Heart of a Sheridan!
I'm sorry if this sounds bad, but you might as well have asked " I want to build a car, where can I buy the parts?"
What kind of pump do you want to build? Sheridan, Nelson, Cocker, ect.?
Nice things I used to own.......
|04-06-2011, 02:44 AM||#4 (permalink)|
Join Date: Jun 2009
as for pump kits, there is an extensive review on here somewhere...
Do not go gentle into that good night.
Rage, rage against the dying of the light.
|01-27-2013, 12:22 PM||#6 (permalink)|
US ARMY SIG CORPS
Join Date: Dec 2010
Location: Spanaway, Washington
The components for pre and post 2K are all mostly the same, the only big difference is the threads for the pump guide rod and in some cases the velocity adjuster in the rear.
You would need:
- Body, back block, detent, vert asa, vert asa 12pt screw and o-ring
- Pump, gide rod, pump rod
- Internals: Valve and guide, Valve retaining screw, valve jam nut, hammer, velocity adjuster, cocking rod, plus springs and O-rings
- You also need a frame and maybe a beaver tail
- also a bolt
Hope this helps
|Thread Tools||Search this Thread|