traccer screw.

FeedTheDogg · 06-17-2007, 03:08 PM

What kind of screws do traccers use to mount a bottomline? I kept looking for screws but it doesnt even feel like their threads in there. btw, whys the traccer say both ACI and PMI on the trigger frame....

DarkNinja · 06-17-2007, 06:13 PM

You have to remove the screw thats in there holding on the euro/lonestar grip. The new screw that goes through the bottom line holds the grip onto the frame as well as mount the bottom line. I think its a 1/4-20 thread and is about 5" long.

ACI made the Trracer for PMI from what I remember, later on ACI started branding them Mavericks. There are a few differences between Mavericks and Trracers. The biggest one I have found seems to be that the Trracers use some strange threading on the valve and valve seat and the Mavericks use standard nelson stuff.

FeedTheDogg · 06-17-2007, 06:50 PM

any idea what kinda tool you need to get that screw out....I CANT SEE IT! lol. btw im sure its the stock screw holding it in cause i had to peel that sticker thingy off.

DarkNinja · 06-17-2007, 08:42 PM

3/16 hex key would be my guess, if not that its something close to it.

Railgun · 06-17-2007, 11:37 PM

It's a 1/4-20 screw so the 3/16 hex long end should get in there.

06-17-2007, 03:08 PM	#1 (permalink)
FeedTheDogg Active Member Join Date: Jul 2006 Location: Carlsbad, CA	traccer screw. What kind of screws do traccers use to mount a bottomline? I kept looking for screws but it doesnt even feel like their threads in there. btw, whys the traccer say both ACI and PMI on the trigger frame.... Last edited by FeedTheDogg; 06-17-2007 at 05:05 PM..

06-17-2007, 06:13 PM	#2 (permalink)
DarkNinja MCB Member Join Date: Apr 2006	You have to remove the screw thats in there holding on the euro/lonestar grip. The new screw that goes through the bottom line holds the grip onto the frame as well as mount the bottom line. I think its a 1/4-20 thread and is about 5" long. ACI made the Trracer for PMI from what I remember, later on ACI started branding them Mavericks. There are a few differences between Mavericks and Trracers. The biggest one I have found seems to be that the Trracers use some strange threading on the valve and valve seat and the Mavericks use standard nelson stuff. __________________

06-17-2007, 06:50 PM	#3 (permalink)
FeedTheDogg Active Member Join Date: Jul 2006 Location: Carlsbad, CA	any idea what kinda tool you need to get that screw out....I CANT SEE IT! lol. btw im sure its the stock screw holding it in cause i had to peel that sticker thingy off. Last edited by FeedTheDogg; 06-17-2007 at 07:01 PM..

06-17-2007, 08:42 PM	#4 (permalink)
DarkNinja MCB Member Join Date: Apr 2006	3/16 hex key would be my guess, if not that its something close to it. __________________

06-17-2007, 11:37 PM	#5 (permalink)
Railgun MCB Member Join Date: Oct 2006	It's a 1/4-20 screw so the 3/16 hex long end should get in there. __________________ Model airplanes are cool too!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search