|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|07-28-2006, 12:24 PM||#1 (permalink)|
Ok, i am looking at purchasing deepfriedpenguin's GX-3 autococker, and i was wondering what people think of these cockers. I know that they retailed much higher than plain jane WGP's, but alas, i have no cocker experience. So, any input would be appreciated.
|07-28-2006, 12:30 PM||#2 (permalink)|
Join Date: Apr 2006
Location: Hudson, NH
Not the exact same thing, but pretty similar. They are good guns, just a little heavy since they have a lot of stainless steel parts. The bolt can be sketchy. A lot of people say ANS pnuematics are scetchy, but the newer ones are supposed to be better. I'm not a big fan of the Jackhammer reg. though.
|07-28-2006, 12:36 PM||#3 (permalink)|
I have a Phantom
other than the body style they no different than plain jane WGP Cocker, however I have had nothing but bad luck with ANS's LPR, the seal would leak after just a couple cases of paint, ANS were pretty good about it and replace the regulator with a new one, unfortunately that one too had the same problem.
I ended up getting my money back and bought a PPS Mini Rock and I never looked back
|07-28-2006, 12:38 PM||#4 (permalink)|
Err.... hard decisions.
Maybe ill just stave off and get a new pickup...
|07-28-2006, 02:46 PM||#5 (permalink)|
Join Date: Jul 2006
I too dislike ans lprs, however I have to say I have had no problems with the ans jackhammer II reg. I have 3 in use, all work without leaks. I won't buy one but if it came on a gun I will run it untill fails or a get a palmers rock, wichever comes first.
|07-28-2006, 08:55 PM||#6 (permalink)|
Join Date: Mar 2006
Location: Northern California
Here's my GX-3... really upgraded though.
Runs great with CO2 with the Fatty Stab and Rock. Fast with AKA Lightning bolt and QEVs. One sweet cocker.
ANS GX-3 Cocker
Palmer Fatty Stab.
Palmer Rock LPR
Adjusted by Craig Palmer
2 Eclipse QEVs
AKA Lightning Bolt
Check It Unimount 2
|Thread Tools||Search this Thread|