Paintball

[rockindrummer]

I want to make a speedball 98.... So my first thoughts were to egrip it with a vitrtue or ape board..... Then after that I'm lost...... I know i would need either a lpk or an expansion chamber Idk which though....... I know i should get a new bolt and new reg and Idk about those either..... Also I want a nice trigger on it good for walking I've been watching tinmans videos and i really like his tech t fang triggers I would like something like that ......
Help me guys I'm a lost puppie with this project .... To get this stuff done would I need to mod the t98 internally or with this stuff just fall into place? Also is a centerfeed necessary or can I go without that?
Lastly mods that are appsoluetly unnecessary but would be sweet if possible
Lcd grip
Eyes
And is it possible to reprogram board startups because I heard about this board once that with the startup it would say on the lcd "light um up" and that would be so Damn cool....

Let me know if I missed any necessary parts... Thankyou for your time, help, and knowledge.
Dom

[rockindrummer]

Mabey this should be in the custom projects section admin?

[randall ace]

egrip w/virtue board - low pressure kit -stab reg ( or similar) - rear velocity adjuster- on/off bleed asa - techt zero kick hammer and fang trigger - act kit if not already act- metal power tube - orange front bolt- rufus centerfeed ( or a bt rip clip) - freak kit

these would be a start id think

[Leafy]

Are you doing this to actually do tournaments or just for giggles? If you actually want to seriously do tournaments you should just buy a used speedball gun for the price of the couple hundred bucks you're putting into the 98. Just for giggles? Throw a double trigger and e-grip on it and you'll be mostly fine with a good barrel and a 68/45. Maybe a spring kit, rva, reg, and center feed if you feel like it.

[rockindrummer]

Just for giggles I barely play speedball and i think it'd be more fun to make my own gun than buy one already made

[rockindrummer]

Originally Posted by randall ace

egrip w/virtue board - low pressure kit -stab reg ( or similar) - rear velocity adjuster- on/off bleed asa - techt zero kick hammer and fang trigger - act kit if not already act- metal power tube - orange front bolt- rufus centerfeed ( or a bt rip clip) - freak kit

these would be a start id think

Does it have to have a lpk? What about just an expansion chamber? Also is there a certain asa that should be used the current one I'm looking at has a duckbill asa

[randall ace]

the lpk would help a great deal with efficiency ......... and id use a direct mount CP on-off bleed asa ..... simple , works great

[Leafy]

They dont sell the LPK anymore. You can deal with that by just springing and reg, wont be super low pressure but it'll be the best efficiency you can get out of it if you can sweet spot it and still re-cock.

[rockindrummer]

K I'll get the bleed asa the lpk prolly isn't happening Yeh because 1 they are hard to come by and expensive and 2 i don't know how to install it ..... Every other mod is mostly easy so.....
And what should I DO with the expansion chamber? The gun I'm buying already comes with one.... Should i take it off or leave it on

[Leafy]

If its the kind that you can unscrew the x chamber and screw a reg in, keep it, and put a reg that can go up to 800 psi in it. If not, scrap it.