Automag question?

RaYmUnDo123 · 04-07-2012, 11:00 AM

I have a automag classic.....I want to by pass the air regulator and attach the macroline from the asa to the valve/bolt. Is this possible?

C_losjoker · 04-07-2012, 11:02 AM

Sure is, that's how most run theirs

ScreamingShiek · 04-07-2012, 11:27 AM

The rear portion of the valve assembly is a regulator. If you are trying to bypass this, I would highly recommend against it. If you are just skipping running a line to the foregrip, then running another to the valve, that's easy. Just get an ASA that has a right side port and run about a 1 foot macro or steel line in an arc. I run most of mine like that.

04-07-2012, 11:00 AM	#1 (permalink)
RaYmUnDo123 Newbie Join Date: Mar 2012	Automag question? I have a automag classic.....I want to by pass the air regulator and attach the macroline from the asa to the valve/bolt. Is this possible?

04-07-2012, 11:27 AM	#3 (permalink)
ScreamingShiek Active Member Join Date: Dec 2010 Location: South Jersey	The rear portion of the valve assembly is a regulator. If you are trying to bypass this, I would highly recommend against it. If you are just skipping running a line to the foregrip, then running another to the valve, that's easy. Just get an ASA that has a right side port and run about a 1 foot macro or steel line in an arc. I run most of mine like that. __________________ My Feedback http://www.mcarterbrown.com/forums/f...-feedback.html

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

04-07-2012, 11:02 AM	#2 (permalink)
C_losjoker Un Tico Join Date: Mar 2008 Location: San Ramon, CA	Sure is, that's how most run theirs