mcarterbrown.com  

Ask The Experts You ask the tough questions

Reply
 
Thread Tools Search this Thread
Old 04-26-2012, 09:11 AM   #1 (permalink)
a.k.a. Kazzy
 
Join Date: Jun 2008
Location: Keene, NH

CCM Fan
E1 Noid Issue

Hey there.

Experiencing a weird problem.

I have a customer's cocker that is leaking from the noid. It's an E1 and I've swapped out noids with the same leak. I've also used two different gaskets (not to say either is a good swap) but it's leaking right at the connection between the E1 Barb plate and the noid.

The pressure on the marker is set to 325 and the LPR is currently off. I'm thinking it's a bad housing body, but does anyone else have any idea?

Thanks,
Ryan
__________________
MCB Feedback!

Ebay Feedback
RCasna is offline   Reply With Quote
Old 04-28-2012, 01:03 PM   #2 (permalink)
Post Whore
 
hmcl281's Avatar
 
Join Date: Aug 2007

your noid will not leak if your lpr is actually off.

you need to verify the lpr is working properly and a bad ram will cause your noid to leak also
hmcl281 is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » Ask The Experts

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 11:01 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC