UNIBODY phantom feed question - Page 2

hellion360 · 05-02-2012, 04:47 PM

Pretty much everything is backwards compatible.
Vertical adapter is not unless you like drilling.

hellion360 · 05-03-2012, 08:23 PM

Feast your eyes on my completed gun!

Scope out that sight pin! Thanks Mike!

THE-SHOOTIST · 05-03-2012, 09:35 PM

Nnnnnnnnniiiiiiiiiicccccccccccceeeeeeeeeeee!

hellion360 · 05-03-2012, 09:39 PM

Thanks! Planning on a fishing line detent to finish it off.

wpshin01 · 05-03-2012, 09:44 PM

I just emailed ASP about doing them, because I won the one in the auction

He said he can do unibody Phantoms too, and it's only 25. Something to think about.

hellion360 · 05-04-2012, 03:28 PM

Installed detent on my own

tomdabmb · 05-04-2012, 04:14 PM

I have always like unibodies.

letlow · 05-14-2012, 08:27 PM

Wow guys thanks for the info. I just purchased a unibody phantom online. It looks a lot like yours Hellion. It hasn't arrived in mail, but will soon. It will be my second phantom. I am definatly going to try the fishing line dentents. What pound test did you use?

hellion360 · 05-14-2012, 08:31 PM

I used 30 lb.
Post pics!

letlow · 05-15-2012, 08:45 PM

Here are a couple of pics from ebay of my new Phantom. Should be here the end of the week.

old school phantom pump marker | eBay

05-02-2012, 04:47 PM	#11 (permalink)
hellion360 Power Lurker Join Date: Aug 2006	Pretty much everything is backwards compatible. Vertical adapter is not unless you like drilling. __________________ MCB Feedback old pbn feedback

05-03-2012, 08:23 PM	#12 (permalink)
hellion360 Power Lurker Join Date: Aug 2006	Feast your eyes on my completed gun! Scope out that sight pin! Thanks Mike! __________________ MCB Feedback old pbn feedback

05-03-2012, 09:39 PM	#14 (permalink)
hellion360 Power Lurker Join Date: Aug 2006	Thanks! Planning on a fishing line detent to finish it off. __________________ MCB Feedback old pbn feedback

05-03-2012, 09:44 PM	#15 (permalink)
wpshin01 Active Member Join Date: Oct 2011 Location: Louisville, KY	I just emailed ASP about doing them, because I won the one in the auction He said he can do unibody Phantoms too, and it's only 25. Something to think about. __________________ Feedback http://www.mcarterbrown.com/forums/f...ml#post2046032

05-04-2012, 03:28 PM	#16 (permalink)
hellion360 Power Lurker Join Date: Aug 2006	Installed detent on my own __________________ MCB Feedback old pbn feedback

05-03-2012, 09:35 PM	#13 (permalink)
THE-SHOOTIST MCB Member Join Date: Apr 2006 Location: Saugus MA	Nnnnnnnnniiiiiiiiiicccccccccccceeeeeeeeeeee!

05-14-2012, 08:27 PM	#18 (permalink)
letlow MCB Member Join Date: Apr 2011 Location: Northern California	Unibody Wow guys thanks for the info. I just purchased a unibody phantom online. It looks a lot like yours Hellion. It hasn't arrived in mail, but will soon. It will be my second phantom. I am definatly going to try the fishing line dentents. What pound test did you use?

05-14-2012, 08:31 PM	#19 (permalink)
hellion360 Power Lurker Join Date: Aug 2006	I used 30 lb. Post pics! __________________ MCB Feedback old pbn feedback

05-15-2012, 08:45 PM	#20 (permalink)
letlow MCB Member Join Date: Apr 2011 Location: Northern California	Phantom Unibody Here are a couple of pics from ebay of my new Phantom. Should be here the end of the week. old school phantom pump marker \| eBay

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search