mcarterbrown.com  

Ask The Experts You ask the tough questions

Reply
 
Thread Tools Search this Thread
Old 07-07-2012, 06:55 PM   #1 (permalink)
Active Member
 
Shut Em Down's Avatar
 
Join Date: Nov 2010
Location: Katy, Texas

Ebladed STO, need some help

So I just got an ebladed STO and currently it's not working. When ever you pull the cocking rod back it won't catch the sear. Is this normal? Or do I have an issue somewhere else and need to adjust and tune it? This is the first time I've dealt with an Eblade but I am familiar with cockers. Thanks.
__________________
I <3 Phantoms and Mags
Katy, Texas
Shut Em Down is offline   Reply With Quote
Old 07-07-2012, 07:11 PM   #2 (permalink)
Rec Poster
 
Join Date: Mar 2010

It should be one of two things. Either the sear is worn down and not catching the lug in the hammer or the lug isn't far enough down.
Beyond The Grave is offline   Reply With Quote
Old 07-07-2012, 07:12 PM   #3 (permalink)
Active Member
 
Woodsballer's Avatar
 
Join Date: Jul 2010
Location: Houston Area

Depending on how your cocker was setup to begin with you're probably going to need to drop your lug lower. Pull the bolt out, Allen wrench trough the top hole. Turn clockwise 1/4 and try it. Keep doing that until it catches. Once it catches you can then try fine tuning it to be perfect, but remember don't go too short also be careful and don't screw it in too much at first because you could damage the frame
__________________
Finally got around to making a Feedback Page
Woodsballer is offline   Reply With Quote
Old 07-07-2012, 07:13 PM   #4 (permalink)
Active Member
 
Woodsballer's Avatar
 
Join Date: Jul 2010
Location: Houston Area

Quote:
Originally Posted by Beyond The Grave View Post
It should be one of two things. Either the sear is worn down and not catching the lug in the hammer or the lug isn't far enough down.

I got too wordy with my response...lol
__________________
Finally got around to making a Feedback Page

Last edited by Woodsballer; 07-09-2012 at 09:35 AM.
Woodsballer is offline   Reply With Quote
Old 07-08-2012, 10:25 PM   #5 (permalink)
Active Member
 
Shut Em Down's Avatar
 
Join Date: Nov 2010
Location: Katy, Texas

yeah turns out the lug was completely backed out. So the hammer just spun around in the lower tube. I just had to take off the frame and line it up and adjust the lug down, So its all good now. My friend kept trying to convince me that there was a solinoid in place of it. Thanks for the help!
__________________
I <3 Phantoms and Mags
Katy, Texas
Shut Em Down is offline   Reply With Quote
Old 07-09-2012, 09:39 AM   #6 (permalink)
Active Member
 
Woodsballer's Avatar
 
Join Date: Jul 2010
Location: Houston Area

Nice! Glad to hear it was an easy fix. You do have a 'noid, it replaced your manual 3-way that are on mech cockers. I guess it's still considered a 3 way when it's electro, but it's still a 'noid
__________________
Finally got around to making a Feedback Page
Woodsballer is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » Ask The Experts

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 08:40 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC