- - good elbows?
|tjd10684 ||07-08-2012 08:02 PM |
I have a few older guns that need elbows who makes some good ones now.
|Frenchy ||07-08-2012 08:42 PM |
|tjd10684 ||07-08-2012 08:51 PM |
How secure are they can you crank them down and put a modern hopper on top like a rotor and not have them twist? I guess that is my main problem I can get my rotor in a elbow on top of my mag or spyders but it tends to "fall" down as your shooting.
|Fatalis ||07-08-2012 08:54 PM |
^ Never had a issue with the Atomic elbow and my mags w/ rotors.
|Disco ||07-08-2012 09:05 PM |
Techt makes an all aluminum 45* feedneck.
I used to swear by my Armson elbow. Then it cracked on me on one particularly cold day.
Then I picked up a few old ACI elbows (no longer made) and they are tough as nails. I have three I think...
If/when I need to replace them...I guess I will go with the Atomic elbow...seems to be the only game in town as far as high quality plastic elbows go.
|Jaccen ||07-08-2012 11:14 PM |
3/4" or 1" pvc 45 degree elbow (whichever fits) with 2 worm clamps.
Super ugly, but it works like a champ.
|James_Blond ||07-09-2012 12:49 PM |
I have one of the old clear vlbows that works like a champ. Plastic isn't brittle like some newer elbows, but has some give in it. If you have a problem with the elbow slipping I would suggest a piece of grip tape on one side of the feedneck or once around. See if that gives enough friction to prevent slips.
|snaparen ||07-09-2012 08:12 PM |
Thats interesting....I just had one break on me last weekend. I did not get it from Titus, so who would I contact for a replacement?
Not knocking the Atomic elbow. It is by far one of the best ones I have ever used, and I was very shocked when it split down the seam in game.
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC